X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9x5ek.h;h=d85a4867648aca745b1fadf5abc0a5f525a06996;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=eeb29763c91c94e8f69abd44280877679a1f9563;hpb=ceff355a5f3038ddb49618d9adc716b0ed978aea;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index eeb2976..d85a486 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -1,24 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Atmel Corporation
  *
  * Configuation settings for the AT91SAM9X5EK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H__
 #define __CONFIG_H__
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x26f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 
-#define CONFIG_AT91SAM9X5EK
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -27,23 +20,10 @@
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
-/* LCD */
-#define LCD_BPP			LCD_COLOR16
-#define LCD_OUTPUT_BPP		24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
@@ -51,7 +31,6 @@
  */
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
@@ -59,13 +38,9 @@
 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_DBW_8		1
@@ -75,17 +50,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #endif
 
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC		1
-#define CONFIG_ATMEL_NAND_HW_PMECC	1
-#define CONFIG_PMECC_CAP		2
-#define CONFIG_PMECC_SECTOR_SIZE	512
-
 /* USB */
 #ifdef CONFIG_CMD_USB
 #ifndef CONFIG_USB_EHCI_HCD
@@ -104,51 +70,30 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x26e00000
 
-#ifdef CONFIG_SYS_USE_NANDFLASH
+#ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x120000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x300000; " \
-				"bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_SPIFLASH)
+				"0x22000000 0x200000 0x600000; " \
+				"nand read 0x21000000 0x180000 0x20000; " \
+				"bootz 0x22000000 - 0x21000000"
+#elif defined(CONFIG_SPI_BOOT)
 /* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_ENV_OFFSET	0x5000
-#define CONFIG_ENV_SIZE		0x3000
-#define CONFIG_ENV_SECT_SIZE	0x1000
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x100000 0x300000; " \
 				"bootm 0x22000000"
 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 /* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x84000 0x294000; " \
 				"bootm 0x22000000"
-#else /* CONFIG_SYS_USE_MMC */
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE		0x4000
 #endif
 
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
 
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x6000
 #define CONFIG_SPL_STACK		0x308000
 
@@ -164,13 +109,13 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
+#elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
+#endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
@@ -178,12 +123,5 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
-#elif CONFIG_SYS_USE_SPIFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
-
-#endif
 
 #endif