X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9x5ek.h;h=799b75719e64b68c7cfbf83661bd1fbea95d144a;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=f6749c14ff1ae9404b1e913ccbc9477ca32630d0;hpb=1646eba85c9755552d246099a82329e4caba32ee;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index f6749c1..799b757 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -23,29 +23,18 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
-#define CONFIG_USART_ID		ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP			LCD_COLOR16
 #define LCD_OUTPUT_BPP		24
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 
 /*
@@ -56,16 +45,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/* no NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * Command line configuration.
  */
 #define CONFIG_CMD_NAND
 
 /*
- * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
+ * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
  */
 
@@ -75,11 +61,10 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif
 
@@ -105,38 +90,12 @@
 #define CONFIG_CMD_NAND_TRIMFFS
 
 #define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
-
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/* FAT */
-#ifdef CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-
 /* USB */
 #ifdef CONFIG_CMD_USB
-#ifdef CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#else
+#ifndef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
@@ -155,7 +114,7 @@
 #ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x120000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read " \
@@ -184,7 +143,6 @@
 #else /* CONFIG_SYS_USE_MMC */
 /* bootstrap + u-boot + env + linux in mmc */
 #define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
 #define FAT_ENV_INTERFACE	"mmc"
 #define FAT_ENV_FILE		"uboot.env"
 #define FAT_ENV_DEVICE_AND_PART "0"
@@ -206,8 +164,6 @@
 	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
 #endif
 
-#define CONFIG_BAUDRATE		115200
-
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_LONGHELP
@@ -230,10 +186,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #define CONFIG_SYS_MASTER_CLOCK		132096000
@@ -243,14 +195,10 @@
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
@@ -263,8 +211,6 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SPIFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400