X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9rlek.h;h=e418edddfbe5bfacfc9de31e114e7bc6da2bd46a;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=3e18716e20fd6e6089cca903c26bc8c428b9424a;hpb=abe66b1b5decf9cc2fb5daad42c9e870e5b99b67;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 3e18716..e418edd 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -16,36 +16,19 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* main clock xtal */
 
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#define CONFIG_ATMEL_LEGACY
-
 /*
  * Hardware drivers
  */
 
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO			1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO			1
-#define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_ATMEL_LCD		1
-#define CONFIG_ATMEL_LCD_RGB565		1
-/* Let board_init_f handle the framebuffer allocation */
-#undef CONFIG_FB_ADDR
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	(16 * 1024)
+#define CONFIG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -61,47 +44,4 @@
 
 #endif
 
-/* Ethernet - not present */
-
-/* USB - not supported */
-
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x140000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x600000; "	\
-				"nand read 0x21000000 0x180000 0x80000; "	\
-				"bootz 0x22000000 - 0x21000000"
-
-#else /* CONFIG_SYS_USE_MMC */
-
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE		0x4000
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
-				"fatload mmc 0:1 0x22000000 zImage; " \
-				"bootz 0x22000000 - 0x21000000"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
 #endif