X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9rlek.h;h=8a8eb7c34fd96293c4a3f66f2311916a6a60a23b;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=d5f0197466176a7958c29b66cc361fcefadc4b5b;hpb=fce0a90a68de507dc827c1ff40d9e446047fa043;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index d5f0197..8a8eb7c 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -23,69 +23,31 @@
 
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
 
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO		1
-#define CONFIG_AT91_GPIO_PULLUP		1
 
 /*
  * Hardware drivers
  */
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
 /* LCD */
-#define CONFIG_LCD			1
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO			1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
 /* Let board_init_f handle the framebuffer allocation */
 #undef CONFIG_FB_ADDR
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-
-
-/* LED */
-#define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PD14	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PD15	/* this is the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PD16	/* this is the user2 led */
-
-#define CONFIG_BOOTDELAY	3
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_USB
 
 #define CONFIG_CMD_NAND			1
 
@@ -95,7 +57,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
@@ -106,9 +68,6 @@
 #define DATAFLASH_TCSS				(0x1a << 16)
 #define DATAFLASH_TCHS				(0x1 << 24)
 
-/* NOR flash - not present */
-#define CONFIG_SYS_NO_FLASH			1
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -147,25 +106,42 @@
 				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
-#else /* CONFIG_SYS_USE_NANDFLASH */
+#elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_OFFSET		0x120000
+#define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x600000; "	\
+				"nand read 0x21000000 0x180000 0x80000; "	\
+				"bootz 0x22000000 - 0x21000000"
+#define CONFIG_BOOTARGS		\
+				"console=ttyS0,115200 earlyprintk "				\
+				"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
+				"256K(env),256k(env_redundant),256k(spare),"			\
+				"512k(dtb),6M(kernel)ro,-(rootfs) "				\
+				"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+
+#else /* CONFIG_SYS_USE_MMC */
+
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_FILE		"uboot.env"
+#define FAT_ENV_DEVICE_AND_PART	"0"
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
+				"fatload mmc 0:1 0x22000000 zImage; " \
+				"bootz 0x22000000 - 0x21000000"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock5 " \
-				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
-				"rw rootfstype=jffs2"
-
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mmcblk0p2 rw rootwait"
 #endif
 
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_AUTO_COMPLETE