X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9rlek.h;h=6fad75d6be006c1de80f4b6deecb4a3d34e4992c;hb=4b142febff71eabdb7ddbb125c7b583b24ddc434;hp=35fefc4213142e76ebd3e7fb8a8d5f19e8916094;hpb=13d36ec849785453953d00220b2c7dc66644a3c2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 35fefc4..6fad75d 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -28,17 +28,13 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91_CPU_NAME		"AT91SAM9RL"
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
-#define AT91_MASTER_CLOCK	100000000	/* peripheral */
-#define AT91_CPU_CLOCK		200000000	/* cpu */
-#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
-
-#define AT91_SLOW_CLOCK		32768	/* slow clock */
+#define CONFIG_SYS_HZ		1000
 
 #define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
 #define CONFIG_AT91SAM9RL	1	/* It's an Atmel AT91SAM9RL SoC*/
 #define CONFIG_AT91SAM9RLEK	1	/* on an AT91SAM9RLEK Board	*/
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
@@ -69,6 +65,12 @@
 #define CONFIG_ATMEL_LCD_RGB565		1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PD14	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PD15	/* this is the user1 led */
+#define	CONFIG_YELLOW_LED	AT91_PIN_PD16	/* this is the user2 led */
+
 #define CONFIG_BOOTDELAY	3
 
 /*
@@ -76,12 +78,12 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_USB
 
 #define CONFIG_CMD_NAND		1
@@ -92,6 +94,7 @@
 #define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
 #define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
@@ -104,10 +107,19 @@
 #define CONFIG_SYS_NO_FLASH			1
 
 /* NAND flash */
-#define NAND_MAX_CHIPS			1
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PB6
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD17
+
+#endif
 
 /* Ethernet - not present */
 
@@ -129,7 +141,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */
@@ -142,7 +154,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif
@@ -157,7 +169,6 @@
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
-#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */