X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9rlek.h;h=683322a6fa3c8e18ed5225fb56df0f0a0303c7f5;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=23184ceba00086f1275c5a42a01904e191ff0da6;hpb=ae5070d627fa04f42fc8b29400e2d189eb8b6bd2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 23184ce..683322a 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -23,58 +23,35 @@
 
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
 
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO		1
-#define CONFIG_AT91_GPIO_PULLUP		1
 
 /*
  * Hardware drivers
  */
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO			1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
 /* Let board_init_f handle the framebuffer allocation */
 #undef CONFIG_FB_ADDR
 
-/* LED */
-#define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PD14	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PD15	/* this is the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PD16	/* this is the user2 led */
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_NAND			1
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
@@ -85,9 +62,6 @@
 #define DATAFLASH_TCSS				(0x1a << 16)
 #define DATAFLASH_TCHS				(0x1 << 24)
 
-/* NOR flash - not present */
-#define CONFIG_SYS_NO_FLASH			1
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -103,15 +77,6 @@
 
 #endif
 
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet - not present */
 
 /* USB - not supported */
@@ -124,7 +89,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 #define CONFIG_ENV_OFFSET		0x4200
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
@@ -138,8 +102,7 @@
 #elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x120000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x600000; "	\
@@ -155,11 +118,6 @@
 #else /* CONFIG_SYS_USE_MMC */
 
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define FAT_ENV_INTERFACE	"mmc"
-#define FAT_ENV_FILE		"uboot.env"
-#define FAT_ENV_DEVICE_AND_PART	"0"
 #define CONFIG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
 				"fatload mmc 0:1 0x22000000 zImage; " \