X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9rlek.h;h=1c67be56b02b902143193947bef104a49e6d9c86;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=8752f1f3b61144ce7e93f38353239cc4c8742999;hpb=02ccab1908c405fe1449457d4a0d343784a30acb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8752f1f..1c67be5 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9RLEK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -13,15 +12,10 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_TEXT_BASE		0x21F00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* main clock xtal */
 
-#define CONFIG_AT91SAM9RLEK		1	/* It's an AT91SAM9RLEK Board */
-
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
@@ -29,63 +23,31 @@
 #define CONFIG_INITRD_TAG		1
 
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO		1
-#define CONFIG_AT91_GPIO_PULLUP		1
 
 /*
  * Hardware drivers
  */
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO			1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
 /* Let board_init_f handle the framebuffer allocation */
 #undef CONFIG_FB_ADDR
 
-/* LED */
-#define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PD14	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PD15	/* this is the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PD16	/* this is the user2 led */
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_NAND			1
-
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH			1
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define AT91_SPI_CLK				15000000
-#define DATAFLASH_TCSS				(0x1a << 16)
-#define DATAFLASH_TCHS				(0x1 << 24)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8			1
@@ -98,12 +60,6 @@
 
 #endif
 
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
 /* Ethernet - not present */
 
 /* USB - not supported */
@@ -116,58 +72,32 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET		0x4200
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET	0x4200
 #define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock0 " \
-				"mtdparts=atmel_nand:-(root) "\
-				"rw rootfstype=jffs2"
+#define CONFIG_ENV_SECT_SIZE	0x210
+#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
+				"sf read 0x22000000 0x84000 0x294000; " \
+				"bootm 0x22000000"
 
 #elif CONFIG_SYS_USE_NANDFLASH
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x140000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x600000; "	\
 				"nand read 0x21000000 0x180000 0x80000; "	\
 				"bootz 0x22000000 - 0x21000000"
-#define CONFIG_BOOTARGS		\
-				"console=ttyS0,115200 earlyprintk "				\
-				"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-				"256K(env),256k(env_redundant),256k(spare),"			\
-				"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-				"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
 
 #else /* CONFIG_SYS_USE_MMC */
 
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define FAT_ENV_INTERFACE	"mmc"
-#define FAT_ENV_FILE		"uboot.env"
-#define FAT_ENV_DEVICE_AND_PART	"0"
 #define CONFIG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
 				"fatload mmc 0:1 0x22000000 zImage; " \
 				"bootz 0x22000000 - 0x21000000"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"mtdparts=atmel_nand:" \
-				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
-				"root=/dev/mmcblk0p2 rw rootwait"
 #endif
 
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING		1
-#define CONFIG_AUTO_COMPLETE
-
 /*
  * Size of malloc() pool
  */