X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9n12ek.h;h=fe99253e5a1ac16debd802c0a6b6cd63a65c3906;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=7d70d8892a90c3363b720b7074a26daf8140b96d;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 7d70d88..fe99253 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -1,23 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2013 Atmel Corporation. * Josh Wu * * Configuation settings for the AT91SAM9N12-EK boards. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __AT91SAM9N12_CONFIG_H_ #define __AT91SAM9N12_CONFIG_H_ -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ @@ -34,18 +25,13 @@ #define CONFIG_LCD_LOGO #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_HLCD #define CONFIG_ATMEL_LCD_RGB565 /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 @@ -55,16 +41,12 @@ * that address while providing maximum stack area below. */ # define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + (0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* DataFlash */ -#ifdef CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) @@ -73,36 +55,15 @@ #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5) #endif -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#define CONFIG_PMECC_CAP 2 -#define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 - -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define MTDIDS_DEFAULT "nand0=atmel_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs)" - #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ - "mtdparts="MTDPARTS_DEFAULT"\0" \ + "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \ "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" /* Ethernet */ -#define CONFIG_KS8851_MLL -#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */ - #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x26e00000 - /* USB host */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL @@ -114,42 +75,24 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 #endif -#ifdef CONFIG_SYS_USE_SPIFLASH +#ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_OFFSET 0x5000 -#define CONFIG_ENV_SIZE 0x3000 -#define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ "bootm 0x22000000" -#elif defined(CONFIG_SYS_USE_NANDFLASH) +#elif defined(CONFIG_NAND_BOOT) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x120000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ "nand read 0x21000000 0x180000 0x080000;" \ "nand read 0x22000000 0x200000 0x400000;" \ "bootm 0x22000000 - 0x21000000" -#else /* CONFIG_SYS_USE_MMC */ - -/* bootstrap + u-boot + env + linux in mmc */ - -#ifdef CONFIG_ENV_IS_IN_MMC -/* Use raw reserved sectors to save environment */ -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#else -/* Use file in FAT file to save environment */ -#define CONFIG_ENV_SIZE 0x4000 -#endif +#else /* CONFIG_SD_BOOT */ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ @@ -159,18 +102,12 @@ #endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x300000 #define CONFIG_SPL_MAX_SIZE 0x6000 #define CONFIG_SPL_STACK 0x308000 @@ -186,13 +123,9 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#ifdef CONFIG_SD_BOOT #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE +#endif #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 @@ -200,12 +133,5 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 -#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER - -#elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 - -#endif #endif