X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9n12ek.h;h=a9ff4014ba73e51cb536b2800d670d9a77e3f2b3;hb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;hp=e9b97b6e97e751bf47e30baa2c0239cea7a2d646;hpb=4862830b696a6d0750e19d32a82553cdb41a85f8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index e9b97b6..a9ff401 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -25,7 +25,6 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 
 /*
@@ -62,15 +61,6 @@
 	"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
 	"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
 
-/* Ethernet */
-#define CONFIG_KS8851_MLL
-#define CONFIG_KS8851_MLL_BASEADDR	0x30000000 /* use NCS2 */
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x26e00000
-
 /* USB host */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
@@ -85,9 +75,6 @@
 #ifdef CONFIG_SPI_BOOT
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET		0x5000
-#define CONFIG_ENV_SIZE			0x3000
-#define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_BOOTCOMMAND						\
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};"	\
 	"sf probe 0; sf read 0x22000000 0x100000 0x300000; "		\
@@ -96,9 +83,6 @@
 #elif defined(CONFIG_NAND_BOOT)
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x140000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND						\
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};"	\
 	"nand read 0x21000000 0x180000 0x080000;"			\
@@ -107,18 +91,6 @@
 
 #else /* CONFIG_SD_BOOT */
 
-/* bootstrap + u-boot + env + linux in mmc */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-/* Use raw reserved sectors to save environment */
-#define CONFIG_ENV_OFFSET		0x2000
-#define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-/* Use file in FAT file to save environment */
-#define CONFIG_ENV_SIZE			0x4000
-#endif
-
 #define CONFIG_BOOTCOMMAND						\
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};"	\
 	"fatload mmc 0:1 0x21000000 dtb;"				\
@@ -149,16 +121,7 @@
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#elif CONFIG_SPI_BOOT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
-
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
 #endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE