X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9n12ek.h;h=9c9e809accaf59015611e176b320d34215fa4359;hb=c27269953b94d19b3fc7a21a1c3e19985507b94d;hp=14a843641a9c0200ea9d1f8468e7658f86d265ff;hpb=312a6c016a2d81aa3fbc605f5c0c315b6a4e3464;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 14a8436..9c9e809 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -28,7 +28,6 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
@@ -40,7 +39,6 @@
 #define CONFIG_BAUDRATE			115200
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP			24
 #define CONFIG_LCD_LOGO
@@ -49,9 +47,7 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-#define CONFIG_BOOTDELAY		3
 
 /*
  * BOOTP options
@@ -67,14 +63,7 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
@@ -134,7 +123,6 @@
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
@@ -162,7 +150,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_BASE_OHCI
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9n12"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
-#define CONFIG_USB_STORAGE
 #endif
 
 #ifdef CONFIG_SYS_USE_SPIFLASH
@@ -222,7 +209,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -240,11 +226,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
@@ -255,16 +236,10 @@
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
@@ -277,8 +252,6 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SPIFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400