X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9m10g45ek.h;h=ee207cfcca2f5752b5bb8449c2b98500853fbc41;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=a62b70b4596259d00deda3e284f279ea1b14c92e;hpb=a6d4cd4778bcc30f451f2d5d92ec4722ff5b71cc;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index a62b70b..ee207cf 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -1,20 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include - -#define CONFIG_SYS_TEXT_BASE 0x73f00000 - #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* ARM asynchronous clock */ @@ -30,13 +25,6 @@ /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS /* LCD */ #define LCD_BPP LCD_COLOR8 @@ -49,37 +37,20 @@ /* board specific(not enough SRAM) */ #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ -#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ - - /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_NAND /* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 +#define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 @@ -92,99 +63,51 @@ #endif -/* MMC */ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#endif - /* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY -/* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 - #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 -#ifdef CONFIG_SYS_USE_NANDFLASH +#ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 #define CONFIG_BOOTCOMMAND \ "nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" -#elif CONFIG_SYS_USE_MMC +#elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootwait" + #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ "fatload mmc 0:1 0x72000000 zImage; " \ "bootz 0x72000000 - 0x71000000" #endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) /* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x300000 #define CONFIG_SPL_MAX_SIZE 0x010000 #define CONFIG_SPL_STACK 0x310000 #define CONFIG_SYS_MONITOR_LEN 0x80000 -#ifdef CONFIG_SYS_USE_MMC +#ifdef CONFIG_SD_BOOT #define CONFIG_SPL_BSS_START_ADDR 0x70000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#elif CONFIG_SYS_USE_NANDFLASH +#elif CONFIG_NAND_BOOT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_ECC