X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9m10g45ek.h;h=e988d8141078afaae38faf57f192894ea6eb073d;hb=4c25761337570e63e9e2631a81de221e692251e3;hp=6a02188108f0c4a2a3135457b3d2793e2ce01306;hpb=e390e8709149664ff96cf19384264c84573f3082;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 6a02188..e988d81 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -39,8 +39,6 @@
 
 #define CONFIG_AT91SAM9M10G45EK
 #define CONFIG_AT91FAMILY
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -49,6 +47,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
+#define CONFIG_OF_LIBFDT
+
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -59,17 +59,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
-/*
- * This needs to be defined for the OHCI code to work but it is defined as
- * ATMEL_ID_UHPHS in the CPU specific header files.
- */
-#define ATMEL_ID_UHP		ATMEL_ID_UHPHS
-
-/*
- * Specify the clock enable bit in the PMC_SCER register.
- */
-#define ATMEL_PMC_UHP		AT91SAM926x_PMC_UHP
-
 /* LCD */
 #define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
@@ -107,7 +96,6 @@
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_LOADS
 
 #define CONFIG_CMD_PING
@@ -148,13 +136,10 @@
 #define CONFIG_RESET_PHY_R
 
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_BASE_HCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9g45"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
@@ -179,7 +164,6 @@
 	"rw rootfstype=jffs2"
 
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
 #define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
@@ -189,17 +173,10 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
 #endif