X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9m10g45ek.h;h=db5d5ea846b24062a6803557d0f034b9b3198704;hb=HEAD;hp=5e37e2a84230235904bbf9461d65016613a84698;hpb=6637cb7691e55fcf139ba9ff528f60909b9b838c;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 5e37e2a..2ceb806 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -1,228 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include - -#define CONFIG_SYS_TEXT_BASE 0x73f00000 - -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_AT91SAM9M10G45EK - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -/* LCD */ -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_SYS_WHITE_ON_BLACK -#define CONFIG_ATMEL_LCD -#define CONFIG_ATMEL_LCD_RGB565 -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ -#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_NAND +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 -#define CONFIG_SYS_SDRAM_SIZE 0x08000000 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_SDRAM_BASE 0x70000000 +#define CFG_SYS_SDRAM_SIZE 0x08000000 /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 +#define CFG_SYS_NAND_BASE ATMEL_BASE_CS3 /* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CFG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 - -#endif - -/* MMC */ +#define CFG_SYS_NAND_MASK_CLE (1 << 22) +#define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CFG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI #endif -#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_DOS_PARTITION -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -#ifdef CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" -#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env + linux in mmc */ -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootwait" -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ - "fatload mmc 0:1 0x72000000 zImage; " \ - "bootz 0x72000000 - 0x71000000" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -/* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x300000 -#define CONFIG_SPL_MAX_SIZE 0x010000 -#define CONFIG_SPL_STACK 0x310000 - -#define CONFIG_SYS_MONITOR_LEN 0x80000 - -#ifdef CONFIG_SYS_USE_MMC - -#define CONFIG_SPL_BSS_START_ADDR 0x70000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 -#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 - -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#ifdef CONFIG_SD_BOOT +#elif CONFIG_NAND_BOOT +#define CFG_SYS_NAND_U_BOOT_SIZE 0x80000 -#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ +#define CFG_SYS_NAND_ECCSIZE 256 +#define CFG_SYS_NAND_ECCBYTES 3 +#define CFG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } #endif -#define CONFIG_SPL_ATMEL_SIZE -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif