X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9m10g45ek.h;h=2ceb8067d580033c129cc985fd655f6fc7486066;hb=7ff7b46e6ce44b2ee09647a928ce1021c3c8a66e;hp=973e8894d67af033bc648d434e4acf44378b6bb0;hpb=970bf8603b877e2b66170290f751f9c23c120838;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 973e889..2ceb806 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -10,94 +10,40 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
-
-#define CONFIG_AT91SAM9M10G45EK
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
-/* LCD */
-#define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#define CONFIG_ATMEL_LCD_RGB565
-/* board specific(not enough SRAM) */
-#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
+#define CFG_SYS_AT91_SLOW_CLOCK      32768
+#define CFG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE           0x70000000
-#define CONFIG_SYS_SDRAM_SIZE		0x08000000
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE           0x70000000
+#define CFG_SYS_SDRAM_SIZE		0x08000000
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
+#define CFG_SYS_NAND_BASE			ATMEL_BASE_CS3
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+#define CFG_SYS_NAND_MASK_ALE		(1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#define CFG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CFG_SYS_NAND_READY_PIN		AT91_PIN_PC8
 
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env in nandflash */
-#elif CONFIG_SD_BOOT
-/* bootstrap + u-boot + env + linux in mmc */
-#endif
-
-/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE		0x010000
-#define CONFIG_SPL_STACK		0x310000
-
-#define CONFIG_SYS_MONITOR_LEN		0x80000
-
 #ifdef CONFIG_SD_BOOT
-
-#define CONFIG_SPL_BSS_START_ADDR	0x70000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
-#define CONFIG_SYS_SPL_MALLOC_START	0x70080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
+#define CFG_SYS_NAND_U_BOOT_SIZE	0x80000
 
-#define CONFIG_SYS_NAND_ECCSIZE		256
-#define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
+#define CFG_SYS_NAND_ECCSIZE		256
+#define CFG_SYS_NAND_ECCBYTES	3
+#define CFG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }
 #endif
 
-#define CONFIG_SPL_ATMEL_SIZE
-#define CONFIG_SYS_MASTER_CLOCK		132096000
-#define CONFIG_SYS_AT91_PLLA		0x20c73f03
-#define CONFIG_SYS_MCKR			0x1301
-#define CONFIG_SYS_MCKR_CSS		0x1302
+#define CFG_SYS_MASTER_CLOCK		132096000
+#define CFG_SYS_AT91_PLLA		0x20c73f03
+#define CFG_SYS_MCKR			0x1301
+#define CFG_SYS_MCKR_CSS		0x1302
 
 #endif