X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9m10g45ek.h;h=01085476a4307722d159cd7682d56f5491df305f;hb=08574ed339fb474e7d984a2e48160615286e4515;hp=8655dbed1db9b7f4e9061a3d316c391c8c3c7379;hpb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 8655dbe..0108547 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -10,48 +10,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91SAM9M10G45EK
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
-/* LCD */
-#define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#define CONFIG_ATMEL_LCD_RGB565
-/* board specific(not enough SRAM) */
-#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE           0x70000000
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD21 */
@@ -63,63 +31,17 @@
 
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env in nandflash */
-
-#define CONFIG_BOOTCOMMAND						\
-	"nand read 0x70000000 0x200000 0x300000;"			\
-	"bootm 0x70000000"
-#elif CONFIG_SD_BOOT
-/* bootstrap + u-boot + env + linux in mmc */
-
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
-				"fatload mmc 0:1 0x72000000 zImage; " \
-				"bootz 0x72000000 - 0x71000000"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE		0x010000
-#define CONFIG_SPL_STACK		0x310000
-
-#define CONFIG_SYS_MONITOR_LEN		0x80000
-
 #ifdef CONFIG_SD_BOOT
-
-#define CONFIG_SPL_BSS_START_ADDR	0x70000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
-#define CONFIG_SYS_SPL_MALLOC_START	0x70080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }
 #endif
 
-#define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK		132096000
 #define CONFIG_SYS_AT91_PLLA		0x20c73f03
 #define CONFIG_SYS_MCKR			0x1301