X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9263ek.h;h=e45e4dbddc7d8c6fbec8928b92e6ee72681658a7;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=40e167c10a6da155582206cef516cf2a33f60854;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 40e167c..e45e4db 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -26,7 +26,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16367660 /* 16.367 MHz crystal */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_AT91SAM9263EK	1	/* It's an AT91SAM9263EK Board */
 
@@ -42,45 +41,19 @@
 #define CONFIG_SYS_USE_NORFLASH
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
 /*
  * Hardware drivers
  */
 #define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO		1
-#define CONFIG_AT91_GPIO_PULLUP		1
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
 
 /* LCD */
-#define CONFIG_LCD			1
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO			1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PB7	/* the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* the user1 led */
-#define	CONFIG_YELLOW_LED	AT91_PIN_PC29	/* the user2 led */
-
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -93,18 +66,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_USB		1
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -112,12 +74,11 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK			15000000
@@ -252,9 +213,6 @@
 		 AT91_WDT_MR_WDD(0xfff))
 
 #endif
-
-#else
-#define CONFIG_SYS_NO_FLASH			1
 #endif
 
 /* NAND flash */
@@ -272,21 +230,17 @@
 #endif
 
 /* Ethernet */
-#define CONFIG_MACB			1
-#define CONFIG_RMII			1
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE		1
-#define CONFIG_CMD_FAT			1
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
@@ -311,7 +265,7 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x120000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
@@ -323,14 +277,11 @@
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
 #endif
 
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool