X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9261ek.h;h=fbf7389b900935703e25d7cba29bb06c29604c8f;hb=bb3bcfa2426cc6a0aecec7270e3ee67ca843a125;hp=3d108ab6265b96384565f5e9a6013efbc96eb163;hpb=49a7720b215aa3da24bb13266c4c194012f499a6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 3d108ab..fbf7389 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
 
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
@@ -181,7 +180,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3
@@ -195,7 +194,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */
@@ -208,7 +207,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"