X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9261ek.h;h=67a721bc2d49b877028dc9dded849808cf9bd666;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=226f8c1612a0c7c43e0166f72113f04268c41b66;hpb=d44a5f51288aec60c6bdb4ac939d75c24e5bf9c2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 226f8c1..67a721b 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -29,10 +29,6 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_OF_LIBFDT
-
 #define CONFIG_ATMEL_LEGACY
 #define CONFIG_SYS_TEXT_BASE		0x21f00000
 
@@ -51,7 +47,6 @@
 #define CONFIG_BAUDRATE			115200
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
@@ -63,15 +58,12 @@
 #define CONFIG_ATMEL_LCD_BGR555
 #endif
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 /* LED */
 #define CONFIG_AT91_LED
 #define	CONFIG_RED_LED		AT91_PIN_PA23	/* this is the power led */
 #define	CONFIG_GREEN_LED	AT91_PIN_PA13	/* this is the user1 led */
 #define	CONFIG_YELLOW_LED	AT91_PIN_PA14	/* this is the user2 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -84,18 +76,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -107,7 +88,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
@@ -147,7 +127,6 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
 #ifdef CONFIG_AT91SAM9G10EK
@@ -156,8 +135,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
 #endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
@@ -208,10 +185,8 @@
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
 #endif
 
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE