X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9261ek.h;h=4e72bf5f062c10fbabd91aa5acd9083c80e99ae3;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=6f3f2eb882d84e8b018b5c0d503222b5fe4d6100;hpb=d021e942107a1f7304a879cec99286ca462f7be3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 6f3f2eb..4e72bf5 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9261EK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,44 +14,16 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
 
-#ifdef CONFIG_AT91SAM9G10
-#define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
-#else
-#define CONFIG_AT91SAM9261EK		/* It's an Atmel AT91SAM9261 EK*/
-#endif
-
 #include <asm/hardware.h>
 
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_ATMEL_LEGACY
-
 /*
  * Hardware drivers
  */
 
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -60,7 +31,6 @@
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8
@@ -80,8 +50,6 @@
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT
 #define CONFIG_DM9000_NO_SROM
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R
 
 /* USB */
 #define CONFIG_USB_ATMEL
@@ -96,45 +64,17 @@
 #endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	15000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 
 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	15000000
-#define CONFIG_BOOTCOMMAND	"sf probe 0:3; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x120000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
 #endif