X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9260ek.h;h=95499c8764a22fc3c2f6d40355d30b7c5517525a;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=c4b2e1666fe297b41741bc4295527db330f7ed4c;hpb=f5702d7d7fcb2c6668ebb131454bec8f4db82be5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index c4b2e16..95499c8 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -42,13 +42,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -66,7 +59,6 @@
 #define	CONFIG_RED_LED		AT91_PIN_PA9	/* this is the power led */
 #define	CONFIG_GREEN_LED	AT91_PIN_PA6	/* this is the user led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -79,19 +71,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB		1
 
 /*
  * SDRAM: 1 bank, min 32, max 128 MB
@@ -142,7 +122,6 @@
 #define AT91_SPI_CLK			15000000
 #else
 /* Enable MMC. The MCCK is conflicted with DataFlash */
-#define CONFIG_CMD_MMC
 #endif
 
 #ifdef CONFIG_AT91SAM9G20EK
@@ -166,7 +145,6 @@
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
@@ -194,7 +172,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE		1
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
@@ -262,10 +239,8 @@
 	"root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
 #endif
 
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_AUTO_COMPLETE