X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9260ek.h;h=48d7f6a5e639c3ba83b9d92d94d18f1f22ce2e59;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=022353c7fb0ad936093cf6cc929ae458eb7d779a;hpb=0ff27d4a94637d4b1937c625d33212375bd118d9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 022353c..48d7f6a 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -45,20 +45,6 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define	CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
-/* LED */
-#define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIN_PA9	/* this is the power led */
-#define	CONFIG_GREEN_LED	AT91_PIN_PA6	/* this is the user led */
-
 
 /*
  * BOOTP options
@@ -88,10 +74,10 @@
  */
 #ifdef CONFIG_AT91SAM9XE
 # define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #else
 # define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 /*
@@ -143,21 +129,6 @@
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
 #endif
 
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH			1
-
-/* Ethernet */
-#define CONFIG_MACB			1
-#define CONFIG_RMII			1
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R		1
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -204,7 +175,7 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x120000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"