X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91rm9200ek.h;h=e2a2f3b8932460e2d7ef6e913ca37303d98fe14e;hb=d32519ac8a4483803975b5aa4ef4f5affe1964bc;hp=e158b0dd2df4bcd361f1eb75314ecb6eb4819e08;hpb=8b485ba12b0defa0c4ed3559789250238f8331a8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index e158b0d..e2a2f3b 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Andreas Bießmann <biessmann.devel@googlemail.com>
  *
@@ -7,14 +8,12 @@
  * Rick Bronson <rick@efn.org>
  *
  * Configuration settings for the AT91RM9200EK board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __AT91RM9200EK_CONFIG_H__
 #define __AT91RM9200EK_CONFIG_H__
 
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 /*
  * set some initial configurations depending on configure target
@@ -25,9 +24,6 @@
  */
 #ifdef CONFIG_RAMBOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE 0x20100000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x10000000
 #endif
 
 /*
@@ -43,12 +39,10 @@
 #define AT91C_MAIN_CLOCK		((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK		(AT91C_MAIN_CLOCK / 3 )
 #define CONFIG_SYS_HZ_CLOCK		(AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ			1000
 
 /* CPU configuration */
 #define CONFIG_AT91RM9200
 #define CONFIG_AT91RM9200EK
-#define CONFIG_CPUAT91
 #define USE_920T_MMU
 
 #include <asm/hardware.h>	/* needed for port definitions */
@@ -57,15 +51,9 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
 /*
  * Memory Configuration
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		SZ_32M
 
@@ -116,19 +104,9 @@
 #define CONFIG_USART_BASE	ATMEL_BASE_DBGU
 #define CONFIG_USART_ID		0/* ignored in arm */
 
-#define CONFIG_BAUDRATE			115200
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#undef CONFIG_CMD_FPGA
 
 /*
  * Network Driver Setting
@@ -136,28 +114,22 @@
 #define CONFIG_DRIVER_AT91EMAC
 #define CONFIG_SYS_RX_ETH_BUFFER	16
 #define CONFIG_RMII
-#define CONFIG_MII
 
 /*
  * NOR Flash
  */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_BASE		0x10000000
 #define PHYS_FLASH_1			CONFIG_SYS_FLASH_BASE
 #define PHYS_FLASH_SIZE			SZ_8M
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
-#define CONFIG_SYS_FLASH_PROTECTION
 
 /*
  * USB Config
  */
 #define CONFIG_USB_ATMEL			1
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
-#define CONFIG_USB_KEYBOARD			1
-#define CONFIG_USB_STORAGE			1
-#define CONFIG_DOS_PARTITION			1
 
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_USB_HOST_BASE
@@ -167,7 +139,6 @@
 /*
  * Environment Settings
  */
-#define CONFIG_ENV_IS_IN_FLASH
 
 /*
  * after u-boot.bin
@@ -182,7 +153,6 @@
 /*
  * Boot option
  */
-#define CONFIG_BOOTDELAY		3
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE + SZ_16M
@@ -191,16 +161,6 @@
 /*
  * Shell Settings
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		\
-		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /*
  * Size of malloc() pool