X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91rm9200dk.h;h=590c69a19cc6422a968ba59b2ae68779674bbfb2;hb=cb32ed1fc298875845f166d326a3f2704a0d5364;hp=633a053000117a0b3fd980ed984d85c70a6f3ec3;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 633a053..590c69a 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -1,7 +1,7 @@
 /*
  * Rick Bronson <rick@efn.org>
  *
- * Configuation settings for the AT91RM9200DK board.
+ * Configuration settings for the AT91RM9200DK board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -45,33 +45,30 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
-#define MC_PUIA_VAL	0x00000000
-#define MC_PUP_VAL	0x00000000
-#define MC_PUER_VAL	0x00000000
-#define MC_ASR_VAL	0x00000000
-#define MC_AASR_VAL	0x00000000
-#define EBI_CFGR_VAL	0x00000000
-#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL	0x00000000
-#define PIOC_PDR_VAL	0xFFFF0000
-#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
-#define SDRAM		0x20000000 /* address of the SDRAM */
-#define SDRAM1		0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1	0x00000004 /* refresh */
-#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool
@@ -86,6 +83,7 @@
  */
 
 /* define one of these to choose the DBGU, USART0  or USART1 as console */
+#define CONFIG_AT91RM9200_USART
 #define CONFIG_DBGU
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -114,39 +112,8 @@
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-
-#define CONFIG_NAND_LEGACY
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
-
-#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
 
 #include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-
-#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
 
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM 0x20000000