X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91cap9adk.h;h=322718f4417bb9f46f0850fcf85e22364b9b2fb9;hb=bb3bcfa2426cc6a0aecec7270e3ee67ca843a125;hp=01da99b82c83cde73e1aff73d0029e0acecf98b6;hpb=6b7243aa89cdacefe46963dbe11cee0cbf021a49;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 01da99b..322718f 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -28,18 +28,13 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91_CPU_NAME		"AT91CAP9"
 #define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
-#define AT91_MASTER_CLOCK	100000000	/* peripheral */
-#define AT91_CPU_CLOCK		200000000	/* cpu */
-#define CONFIG_SYS_AT91_PLLB	0x10073e01	/* PLLB settings for USB */
-#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
-
-#define AT91_SLOW_CLOCK		32768	/* slow clock */
+#define CONFIG_SYS_HZ		1000
 
 #define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
 #define CONFIG_AT91CAP9		1	/* It's an Atmel AT91CAP9 SoC	*/
 #define CONFIG_AT91CAP9ADK	1	/* on an AT91CAP9ADK Board	*/
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
@@ -70,6 +65,12 @@
 #define CONFIG_ATMEL_LCD_BGR555		1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PC29	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PA10	/* this is the user1 led */
+#define	CONFIG_YELLOW_LED	AT91_PIN_PA11	/* this is the user1 led */
+
 #define CONFIG_BOOTDELAY	3
 
 /*
@@ -85,10 +86,10 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
@@ -101,6 +102,7 @@
 #define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
 #define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
@@ -116,12 +118,21 @@
 #define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT		256
 #define CONFIG_SYS_MAX_FLASH_BANKS		1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 
 /* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
 
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB			1
 #define CONFIG_RMII			1
@@ -130,6 +141,7 @@
 #define CONFIG_RESET_PHY_R		1
 
 /* USB */
+#define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
@@ -159,7 +171,7 @@
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock1 "			\
 				"mtdparts=physmap-flash.0:-(nor);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #else
@@ -175,7 +187,7 @@
 				"root=/dev/mtdblock4 "			\
 				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
 				"16k(env),224k(uboot)ro,-(linux);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #endif
@@ -190,7 +202,6 @@
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
-#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */