X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91-sama5_common.h;h=4631acfd6643aecd7144a6a29d85ab86223b4534;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=ed46e89fd55b94c4cd5bf5e204d812c584bbb27b;hpb=f3177d02f33472352b022adbaf5c47cceebc930d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index ed46e89..4631acf 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -1,92 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common part of configuration settings for the AT91 SAMA5 board.
  *
  * Copyright (C) 2015 Atmel Corporation
  *		      Josh Wu <josh.wu@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __AT91_SAMA5_COMMON_H
 #define __AT91_SAMA5_COMMON_H
 
+#include <linux/kconfig.h>
+
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_ARCH_CPU_INIT
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
-/* general purpose I/O */
-#ifndef CONFIG_DM_GPIO
-#define CONFIG_AT91_GPIO
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-
-#ifdef CONFIG_SD_BOOT
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-/* Use raw reserved sectors to save environment */
-#define CONFIG_ENV_OFFSET		0x2000
-#define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#else
-/* u-boot env in sd/mmc card */
-#define CONFIG_ENV_SIZE		0x4000
-#endif
-
-#define CONFIG_BOOTCOMMAND	"if test ! -n ${dtb_name}; then "	\
-				    "setenv dtb_name at91-${board_name}.dtb; " \
-				"fi; "					\
-				"fatload mmc 0:1 0x21000000 ${dtb_name}; " \
-				"fatload mmc 0:1 0x22000000 zImage; "	\
-				"bootz 0x22000000 - 0x21000000"
-
-#else
-
-#ifdef CONFIG_NAND_BOOT
-/* u-boot env in nand flash */
-#define CONFIG_ENV_OFFSET		0xc0000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE			0x20000
-#define CONFIG_BOOTCOMMAND		"nand read 0x21000000 0x180000 0x80000;"	\
-					"nand read 0x22000000 0x200000 0x600000;"	\
-					"bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SPI_BOOT
-/* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_ENV_OFFSET		0x6000
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_SECT_SIZE		0x1000
-#define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
-					"sf read 0x21000000 0x60000 0xc000; "	\
-					"sf read 0x22000000 0x6c000 0x394000; "	\
-					"bootz 0x22000000 - 0x21000000"
-#endif
-
-#endif
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
 #endif