X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91-sama5_common.h;h=4631acfd6643aecd7144a6a29d85ab86223b4534;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=6e9793ab81f57ab1b14a0ebb7c313135d8ed23c4;hpb=c0912f9bbfb26dd03d189953678691b799d35b6e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 6e9793a..4631acf 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -15,60 +15,4 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* general purpose I/O */ -#if !CONFIG_IS_ENABLED(DM_GPIO) -#define CONFIG_AT91_GPIO -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Command line configuration. - */ - -#ifdef CONFIG_SD_BOOT - -#ifdef CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif - -#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ - "setenv dtb_name at91-${board_name}.dtb; " \ - "fi; " \ - "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" - -#else - -#ifdef CONFIG_NAND_BOOT -/* u-boot env in nand flash */ -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_SPI_BOOT -/* u-boot env in serial flash, by default is bus 0 and cs 0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x60000 0xc000; " \ - "sf read 0x22000000 0x6c000 0x394000; " \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_QSPI_BOOT -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" -#endif - -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - #endif