X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fat91-sama5_common.h;h=4631acfd6643aecd7144a6a29d85ab86223b4534;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=61312773671d09d4cb71aa1b2a4d1845385feb32;hpb=023ff4b88dcec5faa3f9b841bae4d3d232b58ce2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index 6131277..4631acf 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -9,66 +9,10 @@
 #ifndef __AT91_SAMA5_COMMON_H
 #define __AT91_SAMA5_COMMON_H
 
+#include <linux/kconfig.h>
+
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/* general purpose I/O */
-#ifndef CONFIG_DM_GPIO
-#define CONFIG_AT91_GPIO
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
-#ifdef CONFIG_SD_BOOT
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
-#define CONFIG_BOOTCOMMAND	"if test ! -n ${dtb_name}; then "	\
-				    "setenv dtb_name at91-${board_name}.dtb; " \
-				"fi; "					\
-				"fatload mmc 0:1 0x21000000 ${dtb_name}; " \
-				"fatload mmc 0:1 0x22000000 zImage; "	\
-				"bootz 0x22000000 - 0x21000000"
-
-#else
-
-#ifdef CONFIG_NAND_BOOT
-/* u-boot env in nand flash */
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_BOOTCOMMAND		"nand read 0x21000000 0x180000 0x80000;"	\
-					"nand read 0x22000000 0x200000 0x600000;"	\
-					"bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SPI_BOOT
-/* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
-					"sf read 0x21000000 0x60000 0xc000; "	\
-					"sf read 0x22000000 0x6c000 0x394000; "	\
-					"bootz 0x22000000 - 0x21000000"
-#elif CONFIG_QSPI_BOOT
-#define CONFIG_BOOTCOMMAND		"sf probe 0; "					\
-					"sf read 0x21000000 0x180000 0x80000; "		\
-					"sf read 0x22000000 0x200000 0x600000; "	\
-					"bootz 0x22000000 - 0x21000000"
-#endif
-
-#endif
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
 #endif