X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fastro_mcf5373l.h;h=6660eb082985b2bebd7b60693bc41fae48c966f9;hb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;hp=7c8281cae75ced6482542589c4115a30487755db;hpb=ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 7c8281c..6660eb0 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -3,23 +3,7 @@ * * (C) Copyright 2003 Josef Baumgartner * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -33,6 +17,8 @@ #ifndef _CONFIG_ASTRO_MCF5373L_H #define _CONFIG_ASTRO_MCF5373L_H +#include + /* * set the card type to actually compile for; either of * the possibilities listed below has to be used! @@ -53,60 +39,35 @@ #error No card type defined! #endif -/* - * Define processor - * possible values for Urmel board: only Coldfire M5373 processor supported - * (please do not change) - */ - -/* it seems not clear yet which processor defines we should use */ -#define CONFIG_MCF537x /* define processor family */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5373 /* define processor type */ #define CONFIG_ASTRO5373L /* define board type */ /* Command line configuration */ -#include - /* - * CONFIG_MK_RAM defines if u-boot is loaded via BDM (or started from + * CONFIG_RAM defines if u-boot is loaded via BDM (or started from * a different bootloader that has already performed RAM setup) or * started directly from flash, which is the regular case for production * boards. */ -#ifdef CONFIG_MK_RAM +#ifdef CONFIG_RAM #define CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_TEXT_BASE 0x40020000 +#define CONFIG_SYS_TEXT_BASE 0x40020000 #define ENABLE_JFFS 0 #else -#define CONFIG_TEXT_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00000000 #define ENABLE_JFFS 1 #endif -/* Define which commmands should be available at u-boot command prompt */ +/* Define which commands should be available at u-boot command prompt */ #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_XIMG -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS #if ENABLE_JFFS #define CONFIG_CMD_JFFS2 #endif #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_FPGA +#define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - #define CONFIG_MCFRTC #undef RTC_DEBUG @@ -115,21 +76,18 @@ #undef CONFIG_MCFPIT /* I2C */ -#define CONFIG_FSL_I2C -#define CONFIG_HARD_I2C /* I2C with hw support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 80000 -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 80000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* * Defines processor clock - important for correct timings concerning serial * interface etc. - * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) #define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ @@ -147,7 +105,6 @@ */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (2) @@ -211,12 +168,9 @@ * u-boot: 'set' command */ -#define _QUOTEME(x) #x -#define QUOTEME(x) _QUOTEME(x) - #define CONFIG_EXTRA_ENV_SETTINGS \ "loaderversion=11\0" \ - "card_id="QUOTEME(ASTRO_ID)"\0" \ + "card_id="__stringify(ASTRO_ID)"\0" \ "alterafile=0\0" \ "xilinxfile=0\0" \ "xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\ @@ -249,8 +203,6 @@ #define CONFIG_BOOTARGS " console=ttyS2,115200 rootfstype=romfs"\ " loaderversion=$loaderversion" -#define CONFIG_SYS_PROMPT "URMEL > " - /* default RAM address for user programs */ #define CONFIG_SYS_LOAD_ADDR 0x20000 @@ -300,11 +252,10 @@ * Definitions for initial stack pointer and data area (in internal SRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -343,7 +294,7 @@ #define CONFIG_SYS_FLASH_BASE 0x00000000 #ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE CONFIG_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #else /* This is mainly used during relocation in start.S */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) @@ -375,6 +326,10 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #define CONFIG_SYS_FLASH_CFI_NONBLOCK 1 +#define LDS_BOARD_TEXT \ + . = DEFINED(env_offset) ? env_offset : .; \ + common/env_embedded.o (.text*) + #if ENABLE_JFFS /* JFFS Partition offset set */ #define CONFIG_SYS_JFFS2_FIRST_BANK 0 @@ -387,9 +342,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \