X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fastro_mcf5373l.h;h=2e7fbfb396ce7ed7973ba713d6687f78f2b16801;hb=023ff4b88dcec5faa3f9b841bae4d3d232b58ce2;hp=61989d6babe2f1988081e33b6f351bffff419043;hpb=b8682a7fcf69344ac5a2d57c75f9c93bfdc93142;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 61989d6..2e7fbfb 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the Sentec Cobra Board.
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -39,8 +38,6 @@
 #error No card type defined!
 #endif
 
-#define CONFIG_ASTRO5373L		/* define board type */
-
 /* Command line configuration */
 /*
  * CONFIG_RAM defines if u-boot is loaded via BDM (or started from
@@ -50,18 +47,11 @@
  */
 #ifdef CONFIG_RAM
 #define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_TEXT_BASE		0x40020000
 #define ENABLE_JFFS	0
 #else
-#define CONFIG_SYS_TEXT_BASE		0x00000000
 #define ENABLE_JFFS	1
 #endif
 
-/* Define which commands should be available at u-boot command prompt */
-
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMDLINE_EDITING
-
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
 
@@ -121,7 +111,6 @@
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_ENV_OFFSET		0x1FF8000
 #define CONFIG_ENV_SECT_SIZE		0x8000
-#define CONFIG_ENV_IS_IN_FLASH		1
 #else
 /*
  * environment in RAM - This is used to use a single PC-based application
@@ -131,11 +120,9 @@
  */
 #define CONFIG_ENV_ADDR		0x40060000
 #define CONFIG_ENV_SECT_SIZE	0x8000
-#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 /* here we put our FPGA configuration... */
-#define CONFIG_MISC_INIT_R	1
 
 /* Define user parameters that have to be customized most likely */
 
@@ -178,30 +165,10 @@
 #endif
 #endif
 
-/* default bootargs that are considered during boot */
-#define CONFIG_BOOTARGS		" console=ttyS2,115200 rootfstype=romfs"\
-				" loaderversion=$loaderversion"
-
 /* default RAM address for user programs */
 #define CONFIG_SYS_LOAD_ADDR	0x20000
 
-#define CONFIG_SYS_LONGHELP
-
-#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024
-#else
-#define CONFIG_SYS_CBSIZE		256
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 #define CONFIG_FPGA_COUNT	1
-#define CONFIG_FPGA
-#define	CONFIG_FPGA_XILINX
-#define	CONFIG_FPGA_SPARTAN3
-#define CONFIG_FPGA_ALTERA
-#define CONFIG_FPGA_CYCLON2
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_SYS_FPGA_WAIT		1000
 
@@ -298,16 +265,12 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
 #define CONFIG_SYS_FLASH_SIZE		0x2000000
-#define CONFIG_SYS_FLASH_PROTECTION	1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #define CONFIG_SYS_FLASH_CFI_NONBLOCK	1
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o       (.text*)
+	env/embedded.o(.text*)
 
 #if ENABLE_JFFS
 /* JFFS Partition offset set */