X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Faria.h;h=0619cf780d262defccf179d57e439069042ac41e;hb=62a22dca32b988cce5d1908e8ac9fadb139bb3e8;hp=2938eac396dbc2be14f8786448004dec9ba8221f;hpb=5313e0959a7cd41e424b7d810beea9d9a063165a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/aria.h b/include/configs/aria.h
index 2938eac..0619cf7 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,8 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 #define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP	1	/* Don't include FSL DIU binary bmp */
+
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
 /* video */
 #undef CONFIG_VIDEO
@@ -78,6 +79,9 @@
 #define CONFIG_SYS_DDR_SIZE		256		/* MB */
 #define CONFIG_SYS_DDR_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE		0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR	0x00000036
 
 /* DDR Controller Configuration
  *
@@ -190,7 +194,7 @@
 
 /*
  * Backward compatible definitions,
- * so we do not have to change cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
  */
 #define	CONFIG_SYS_DDRCMD_EM2		(CONFIG_SYS_MICRON_EMR2)
 #define CONFIG_SYS_DDRCMD_EM3		(CONFIG_SYS_MICRON_EMR3)
@@ -251,8 +255,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
 
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
@@ -297,14 +299,13 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE		CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(384 * 1024)
 
 #ifdef	CONFIG_FSL_DIU_FB
@@ -320,7 +321,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
@@ -398,7 +398,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC		1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR			0x17
 #define CONFIG_MII			1	/* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT		1
@@ -506,10 +505,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE		32768
@@ -525,14 +524,6 @@
 
 #define CONFIG_HIGH_BATS		1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD			0x01
-#define BOOTFLAG_WARM			0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */