X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fapollon.h;h=b8ca8a849fae1095cfd32e02569d5b541f12ffc4;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=04da083e697d4234165d601c832fab57893ea8e4;hpb=81472d893fa565c9d300928a40e504a689bde131;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 04da083..b8ca8a8 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -37,6 +37,8 @@
 #define CONFIG_APOLLON		1
 #define CONFIG_APOLLON_PLUS	1 /* If you have apollon plus 1.x */
 
+#define CONFIG_ONENAND_U_BOOT	y
+
 /* Clock config to target*/
 #define PRCM_CONFIG_I		1
 /* #define PRCM_CONFIG_II	1 */
@@ -64,7 +66,6 @@
 /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
 #define	CONFIG_SYS_CLK_FREQ	V_SCLK
 
-#undef	CONFIG_USE_IRQ	/* no support for IRQs */
 #define	CONFIG_MISC_INIT_R
 
 #define	CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
@@ -76,9 +77,8 @@
  * Size of malloc() pool
  */
 #define	CONFIG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE_FLEX SZ_256K
 #define	CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + SZ_1M)
-/* bytes reserved for initial data */
-#define	CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
@@ -87,7 +87,7 @@
 /*
  * SMC91c96 Etherent
  */
-#define	CONFIG_DRIVER_LAN91C96
+#define	CONFIG_LAN91C96
 #define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
 #define	CONFIG_LAN91C96_EXT_PHY
 
@@ -111,7 +111,6 @@
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_CONS_INDEX	1
 #define	CONFIG_BAUDRATE		115200
-#define	CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include	<config_cmd_default.h>
@@ -124,10 +123,11 @@
 #define	CONFIG_CMD_JFFS2
 #define	CONFIG_CMD_UBI
 #define	CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #endif
 
-#undef	CONFIG_CMD_AUTOSCRIPT
+#undef	CONFIG_CMD_SOURCE
 
 #ifndef	CONFIG_SYS_USE_NOR
 # undef	CONFIG_CMD_FLASH
@@ -182,10 +182,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define	V_PROMPT	"Apollon # "
-
 #define	CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define	CONFIG_SYS_PROMPT	V_PROMPT
+#define	CONFIG_SYS_PROMPT	"Apollon # "
 #define	CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -208,17 +206,6 @@
 #define	CONFIG_SYS_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define	CONFIG_STACKSIZE SZ_128K	/* regular stack */
-#ifdef	CONFIG_USE_IRQ
-# define	CONFIG_STACKSIZE_IRQ SZ_4K	/* IRQ stack */
-# define	CONFIG_STACKSIZE_FIQ SZ_4K	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define	CONFIG_NR_DRAM_BANKS	1	/* CS1 may or may not be populated */
@@ -251,8 +238,10 @@
 
 /* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
 #define	CONFIG_SYS_ONENAND_BASE	0x00000000
+#define CONFIG_SYS_MONITOR_LEN		SZ_256K	/* U-Boot image size */
 #define	CONFIG_ENV_IS_IN_ONENAND	1
 #define CONFIG_ENV_ADDR		0x00020000
+#define CONFIG_ENV_ADDR_FLEX	0x00040000
 
 #ifdef CONFIG_SYS_USE_UBI
 #define CONFIG_CMD_MTDPARTS
@@ -265,4 +254,8 @@
 					"-(ubifs)"
 #endif
 
+#define PHYS_SRAM			0x4020F800
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
+
 #endif /* __CONFIG_H */