X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fapalis-tk1.h;h=667d084611826454c43ecd677a97b3a67fb6c842;hb=87f78478a4a1bf574db0b0e575ca37cf91fb187c;hp=f750d5fbf9cba5169cdf12877a6a783dd1119456;hpb=6500ec7a5a2a2a59128dba6f49d9905fc1258811;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index f750d5f..667d084 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2017 Toradex, Inc.
  *
  * Configuration settings for the Toradex Apalis TK1 modules.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,7 +15,6 @@
 #define CONFIG_ARCH_MISC_INIT
 
 /* High-level configuration options */
-#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
 
 /* Board-specific serial config */
 #define CONFIG_TEGRA_ENABLE_UARTA
@@ -54,10 +52,6 @@
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP		192.168.10.1
 
-#define CONFIG_BOOTCOMMAND \
-	"run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && " \
-		"run distro_bootcmd"
-
 #define DFU_ALT_EMMC_INFO	"apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
 				"boot part 0 1 mmcpart 0; " \
 				"rootfs part 0 2 mmcpart 0; " \
@@ -86,7 +80,7 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \
+	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
 		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
@@ -97,7 +91,7 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \
+	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
 	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
@@ -145,16 +139,12 @@
 #undef CONFIG_SYS_BARGSIZE
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
-/* Increase print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Increase maximum number of arguments */
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
 #define CONFIG_CMD_TIME
 
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
 #include "tegra-common-usb-gadget.h"