X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fapalis-tk1.h;h=519b3b78238c9f5964a3976de0aac05d48f43784;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=9c8c8979f046fcaa0dc3d9f120da2698594e5946;hpb=eb53a18c9e903e35e8e8d52da96c33b63822881c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 9c8c897..519b3b7 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -12,15 +12,14 @@
 
 #include "tegra124-common.h"
 
-#define CONFIG_ARCH_MISC_INIT
-
 /* Board-specific serial config */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
+#define FDT_MODULE			"apalis-v1.2"
+#define FDT_MODULE_V1_0			"apalis"
+
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
-					 CONFIG_TDX_CFG_BLOCK_OFFSET)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_SYS_MMC_ENV_PART		1
 
@@ -31,10 +30,22 @@
 #define CONFIG_E1000_NO_NVM
 
 /* General networking support */
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE		16352
 #define CONFIG_TFTP_TSIZE
 
+/*
+ * Custom Distro Boot configuration:
+ * 1. 8bit SD port (MMC1)
+ * 2. 4bit SD port (MMC2)
+ * 3. eMMC (MMC0)
+ */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
 #undef CONFIG_IPADDR
 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
@@ -44,63 +55,39 @@
 #define DFU_ALT_EMMC_INFO	"apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
 				"boot part 0 1 mmcpart 0; " \
 				"rootfs part 0 2 mmcpart 0; " \
-				"uImage fat 0 1 mmcpart 0; " \
+				"zImage fat 0 1 mmcpart 0; " \
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
-#define EMMC_BOOTCMD \
-	"emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \
-	"emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \
-		"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
-		"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb && " \
-		"setenv dtbparam ${fdt_addr_r}\0"
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 	"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
 		"${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 		"run nfsdtbload; dhcp ${kernel_addr_r} " \
-		"&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
+		"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
 	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
-
-#define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
-		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
-		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
-
-#define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
-	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
-		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
-		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
+		"${soc}-${fdt_module}-${fdt_board}.dtb " \
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"boot_file=uImage\0" \
+	"boot_file=zImage\0" \
 	"console=ttyS0\0" \
 	"defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
-		"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0\0" \
+		"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
+		"user_debug=30 pcie_aspm=off\0" \
 	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
-	EMMC_BOOTCMD \
 	"fdt_board=eval\0" \
 	"fdt_fixup=;\0" \
+	"fdt_module=" FDT_MODULE "\0" \
 	NFS_BOOTCMD \
-	SD_BOOTCMD \
+	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
@@ -117,8 +104,7 @@
 	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
-	USB_BOOTCMD \
-	"vidargs=video=tegrafb0:640x480-16@60 fbcon=map:1\0"
+	"vidargs=fbcon=map:1\0"
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
@@ -132,10 +118,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
-#define CONFIG_CMD_TIME
-
-#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"