X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fapalis-tk1.h;h=1d296ba51a05edbd35f966b52c187340911f4d43;hb=4862830b696a6d0750e19d32a82553cdb41a85f8;hp=c3cade9ea6b14a8473081a7791195b3c6f611794;hpb=541f538f4ca50082f77f7f34f05950d57804b1cc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index c3cade9..1d296ba 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2017 Toradex, Inc.
  *
  * Configuration settings for the Toradex Apalis TK1 modules.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,32 +14,21 @@
 
 #define CONFIG_ARCH_MISC_INIT
 
-/* High-level configuration options */
-#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
-
 /* Board-specific serial config */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
-/* I2C */
-#define CONFIG_SYS_I2C_TEGRA
-
 /* SD/MMC support */
 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_SYS_MMC_ENV_PART		1
 
-/* USB host support */
-#define CONFIG_USB_EHCI_TEGRA
-
 /* PCI host support */
 #undef CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 
 /* PCI networking support */
 #define CONFIG_E1000_NO_NVM
@@ -56,10 +44,6 @@
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP		192.168.10.1
 
-#define CONFIG_BOOTCOMMAND \
-	"run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && " \
-		"run distro_bootcmd"
-
 #define DFU_ALT_EMMC_INFO	"apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
 				"boot part 0 1 mmcpart 0; " \
 				"rootfs part 0 2 mmcpart 0; " \
@@ -88,7 +72,7 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \
+	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
 		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
@@ -99,7 +83,7 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \
+	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
 	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
@@ -147,16 +131,12 @@
 #undef CONFIG_SYS_BARGSIZE
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
-/* Increase print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Increase maximum number of arguments */
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
 #define CONFIG_CMD_TIME
 
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
 #include "tegra-common-usb-gadget.h"