X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Famcore.h;h=3c9267b14ec98a4aef39dbdd05399c632fe6ea44;hb=6600b355c71e80c99d8edb8603dd5e3df8ed4db8;hp=77fc1ef61b86b47fbea8d0b67c304e12c67c062f;hpb=1f20fc53b382ece8da7440f354b219deb7ed19df;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/amcore.h b/include/configs/amcore.h
index 77fc1ef..3c9267b 100644
--- a/include/configs/amcore.h
+++ b/include/configs/amcore.h
@@ -1,23 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Sysam AMCORE board configuration
  *
  * (C) Copyright 2016  Angelo Dureghello <angelo@sysam.it>
- *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #ifndef __AMCORE_CONFIG_H
 #define __AMCORE_CONFIG_H
 
-#define CONFIG_AMCORE
-#define CONFIG_HOSTNAME			AMCORE
+#define CONFIG_HOSTNAME			"AMCORE"
 
-#define CONFIG_MCFTMR
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		0
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_BOOTCOMMAND		"bootm ffc20000"
 #define CONFIG_EXTRA_ENV_SETTINGS				\
 	"upgrade_uboot=loady; "					\
 		"protect off 0xffc00000 0xffc1ffff; "		\
@@ -30,22 +24,6 @@
 		"erase 0xfff00000 0xffffffff; "			\
 		"cp.b 0x20000 0xfff00000 ${filesize}\0"
 
-/* undef to save memory	*/
-#undef	CONFIG_SYS_LONGHELP
-
-/* Boot argument buffer size	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-#define CONFIG_AUTO_COMPLETE		1 /* add autocompletion support	*/
-#define CONFIG_MX_CYCLIC		1 /* enable mdc/mwc commands	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x20000	/* default load address */
-
-#define CONFIG_SYS_MEMTEST_START	0x0
-#define CONFIG_SYS_MEMTEST_END		0x1000000
-
-#define CONFIG_SYS_HZ			1000
-
 #define CONFIG_SYS_CLK			45000000
 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 2)
 /* Register Base Addrs */
@@ -54,32 +32,17 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 /* size of internal SRAM */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		0x1000000
 #define CONFIG_SYS_FLASH_BASE		0xffc00000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	1024
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 /* amcore design has flash data bytes wired swapped */
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 /* reserve 128-4KB */
-#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN          ((128 - 4) * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
-#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
-
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
-					 CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE			0x1000
-#define CONFIG_ENV_SECT_SIZE		0x1000
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
@@ -95,7 +58,6 @@
  * This is a single unified instruction/data cache.
  * sdram - single region - no masks
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -119,4 +81,3 @@
 #define CONFIG_SYS_CS1_CTRL		0x0100
 
 #endif  /* __AMCORE_CONFIG_H */
-