X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam65x_evm.h;h=d8f18d0b9ac9eb37242e8686cb946e17fe7d6dc8;hb=a331017c237c7da159a1657984250d656ed1c487;hp=0249a20ba8fa0573963076245a3cf5a5c430bcbe;hpb=a9fa70b7b7167487affc5d919e541872c99e814b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index 0249a20..d8f18d0 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -10,52 +10,13 @@
 #define __CONFIG_AM654_EVM_H
 
 #include <linux/sizes.h>
-#include <config_distro_bootcmd.h>
 #include <environment/ti/mmc.h>
-
-#define CONFIG_ENV_SIZE			(128 << 10)
+#include <environment/ti/k3_rproc.h>
+#include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
 #define CONFIG_SYS_SDRAM_BASE1		0x880000000
 
-/* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +	\
-					 CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
-#else
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x5000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M
-#endif
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"tispl.bin"
-#endif
-
-#ifndef CONFIG_CPU_V7R
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-
 #define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 #define PARTS_DEFAULT \
@@ -67,12 +28,11 @@
 	"findfdt="							\
 		"setenv name_fdt k3-am654-base-board.dtb;"		\
 		"setenv fdtfile ${name_fdt}\0"				\
-	"loadaddr=0x80080000\0"						\
-	"fdtaddr=0x82000000\0"						\
-	"overlayaddr=0x83000000\0"					\
 	"name_kern=Image\0"						\
 	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
+	"stdin=serial,usbkbd\0"						\
+	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "  \
+		"${mtdparts}\0"						\
 	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 
 /* U-Boot MMC-specific configuration */
@@ -89,8 +49,8 @@
 		"fdt resize 0x100000;"					\
 		"for overlay in $name_overlays;"			\
 		"do;"							\
-		"load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay};"	\
-		"fdt apply ${overlayaddr};"				\
+		"load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay};"	\
+		"fdt apply ${dtboaddr};"				\
 		"done;\0"						\
 	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
 		"${bootdir}/${name_kern}\0"				\
@@ -98,24 +58,48 @@
 		"${bootdir}/${name_fit}\0"				\
 	"partitions=" PARTS_DEFAULT
 
+#ifdef DEFAULT_RPROCS
+#undef DEFAULT_RPROCS
+#endif
+#define DEFAULT_RPROCS	""						\
+		"0 /lib/firmware/am65x-mcu-r5f0_0-fw "			\
+		"1 /lib/firmware/am65x-mcu-r5f0_1-fw "
+
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
+	"init_ubi=run args_all args_ubi; sf probe; "			\
+		"ubi part ospi.rootfs; ubifsmount ubi:rootfs;\0"	\
+	"get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"	\
+	"get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"	\
+	"args_ubi=setenv bootargs console=${console} ${optargs} "	\
+		"rootfstype=ubifs root=ubi0:rootfs rw ubi.mtd=ospi.rootfs\0"
+
+#define EXTRA_ENV_DFUARGS						\
+	DFU_ALT_INFO_MMC						\
+	DFU_ALT_INFO_RAM						\
+	DFU_ALT_INFO_EMMC						\
+	DFU_ALT_INFO_OSPI
+
+#ifdef CONFIG_TARGET_AM654_A53_EVM
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+#else
+#define BOOTENV
+#endif
+
 /* Incorporate settings into the U-Boot environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	DEFAULT_LINUX_BOOT_ENV						\
 	DEFAULT_MMC_TI_ARGS						\
 	DEFAULT_FIT_TI_ARGS						\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS					\
-	EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC
-
-/* MMC ENV related defines */
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_SYS_MMC_ENV_PART	1
-#define CONFIG_ENV_SIZE		(128 << 10)
-#define CONFIG_ENV_OFFSET		0x680000
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#endif
-
-#define CONFIG_SUPPORT_EMMC_BOOT
+	EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC				\
+	EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
+	EXTRA_ENV_RPROC_SETTINGS					\
+	EXTRA_ENV_DFUARGS						\
+	BOOTENV
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>