X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam65x_evm.h;h=33dd6cfdfa45add2cac6af6bb2f87df1ee2971d7;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=76d73086fb89489590c2727d714465ae46b08a10;hpb=003d10ba6412bb9d888d951efaaf5de7133db89c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index 76d7308..33dd6cf 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -10,61 +10,12 @@
 #define __CONFIG_AM654_EVM_H
 
 #include <linux/sizes.h>
-#include <config_distro_bootcmd.h>
 #include <environment/ti/mmc.h>
 #include <environment/ti/k3_rproc.h>
 #include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
-#define CONFIG_SYS_SDRAM_BASE1		0x880000000
-
-/* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +	\
-					 CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x20000
-#else
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE		0xc00
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START	0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_16M
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x5000
-#endif
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"tispl.bin"
-#endif
-
-#ifndef CONFIG_CPU_V7R
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
- * If the maximum size is not declared then it is defined as
- * CONFIG_SYS_DFU_DATA_BUF_SIZE.
- */
-#define CONFIG_SYS_DFU_MAX_FILE_SIZE	(1024 * 1024 * 8)   /* 8 MiB */
-
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
+#define CFG_SYS_SDRAM_BASE1		0x880000000
 
 #define PARTS_DEFAULT \
 	/* Linux partitions */ \
@@ -112,14 +63,6 @@
 		"0 /lib/firmware/am65x-mcu-r5f0_0-fw "			\
 		"1 /lib/firmware/am65x-mcu-r5f0_1-fw "
 
-#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD				\
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
-#else
-#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD
-#endif
-
 #define EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
 	"init_ubi=run args_all args_ubi; sf probe; "			\
 		"ubi part ospi.rootfs; ubifsmount ubi:rootfs;\0"	\
@@ -134,19 +77,27 @@
 	DFU_ALT_INFO_EMMC						\
 	DFU_ALT_INFO_OSPI
 
+#ifdef CONFIG_TARGET_AM654_A53_EVM
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+#else
+#define BOOTENV
+#endif
+
 /* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
+#define CFG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
 	DEFAULT_MMC_TI_ARGS						\
 	DEFAULT_FIT_TI_ARGS						\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS					\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD				\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
 	EXTRA_ENV_RPROC_SETTINGS					\
-	EXTRA_ENV_DFUARGS
-
-#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
+	EXTRA_ENV_DFUARGS						\
+	BOOTENV
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>