X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam64x_evm.h;h=062102a610d32b1fc4287f2ac22054c2fbc94b19;hb=HEAD;hp=7c520f4395b504a2da54daa1afa1630c82fce5d6;hpb=b91c70433386d133c842729c5d9b109cdcc79399;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
index 7c520f4..062102a 100644
--- a/include/configs/am64x_evm.h
+++ b/include/configs/am64x_evm.h
@@ -11,108 +11,14 @@
 
 #include <linux/sizes.h>
 #include <config_distro_bootcmd.h>
-#include <environment/ti/mmc.h>
+#include <env/ti/mmc.h>
 #include <asm/arch/am64_hardware.h>
-#include <environment/ti/k3_dfu.h>
+#include <env/ti/k3_dfu.h>
 
 /* DDR Configuration */
-#define CONFIG_SYS_SDRAM_BASE1		0x880000000
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"tispl.bin"
-#endif
-
-#ifndef CONFIG_CPU_V7R
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
-#if defined(CONFIG_TARGET_AM642_A53_EVM)
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +	\
-					CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4)
-#else
-/*
- * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
- * possible (to allow the build to go through), as this directly affects
- * our memory footprint. The less we use for BSS the more we have available
- * for everything else.
- */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x1000
-/*
- * Link BSS to be within SPL in a dedicated region located near the top of
- * the MCU SRAM, this way making it available also before relocation. Note
- * that we are not using the actual top of the MCU SRAM as there is a memory
- * location filled in by the boot ROM that we want to read out without any
- * interference from the C context.
- */
-#define CONFIG_SPL_BSS_START_ADDR	(TI_SRAM_SCRATCH_BOARD_EEPROM_START -\
-					 CONFIG_SPL_BSS_MAX_SIZE)
-/* Set the stack right below the SPL BSS section */
-#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
-/* Configure R5 SPL post-relocation malloc pool in DDR */
-#define CONFIG_SYS_SPL_MALLOC_START    0x84000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_16M
-#endif
-
-#define PARTS_DEFAULT \
-	/* Linux partitions */ \
-	"name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_AM642_BOARD_SETTINGS					\
-	"findfdt="							\
-		"if test $board_name = am64x_gpevm; then " \
-			"setenv fdtfile k3-am642-evm.dtb; fi; " \
-		"if test $board_name = am64x_skevm; then " \
-			"setenv fdtfile k3-am642-sk.dtb; fi;" \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"name_kern=Image\0"						\
-	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "	\
-		"${mtdparts}\0"						\
-	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_AM642_BOARD_SETTINGS_MMC				\
-	"boot=mmc\0"							\
-	"mmcdev=1\0"							\
-	"bootpart=1:2\0"						\
-	"bootdir=/boot\0"						\
-	"rd_spec=-\0"							\
-	"init_mmc=run args_all args_mmc\0"				\
-	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"get_overlay_mmc="						\
-		"fdt address ${fdtaddr};"				\
-		"fdt resize 0x100000;"					\
-		"for overlay in $name_overlays;"			\
-		"do;"							\
-		"load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
-		"fdt apply ${dtboaddr};"				\
-		"done;\0"						\
-	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
-		"${bootdir}/${name_kern}\0"				\
-	"get_fit_mmc=load mmc ${bootpart} ${addr_fit} "			\
-		"${bootdir}/${name_fit}\0"				\
-	"partitions=" PARTS_DEFAULT
-
-#define EXTRA_ENV_DFUARGS \
-	DFU_ALT_INFO_MMC \
-	DFU_ALT_INFO_EMMC \
-	DFU_ALT_INFO_RAM \
-	DFU_ALT_INFO_OSPI
-
-/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	DEFAULT_LINUX_BOOT_ENV						\
-	DEFAULT_MMC_TI_ARGS						\
-	EXTRA_ENV_AM642_BOARD_SETTINGS					\
-	EXTRA_ENV_AM642_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_DFUARGS
+#define CFG_SYS_SDRAM_BASE1		0x880000000
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
 
-#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
-
 #endif /* __CONFIG_AM642_EVM_H */