X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam43xx_evm.h;h=7bea61ec155636ddcf37695ba462981ad293cdbd;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=31a1c7e392f275c1857c4df0fdb6868cd5fce9a1;hpb=5371593aed56ee11cbb6cc6ac8d058fcd9b8f58c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 31a1c7e..7bea61e 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -21,15 +21,8 @@
 #endif
 
 /* I2C Configuration */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 
 /* Power */
-#if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#endif
 #define CONFIG_POWER_TPS65218
 #define CONFIG_POWER_TPS62362
 
@@ -42,14 +35,6 @@
 #define CONFIG_SYS_PL310_BASE	0x48242000
 
 /*
- * Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
  * When building U-Boot such that there is no previous loader
  * we need to call board_early_init_f.  This is taken care of in
  * s_init when we have SPL used.
@@ -69,12 +54,9 @@
 
 #if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION		1
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_AM437X_USB2PHY2_HOST
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER)
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
 #undef CONFIG_USB_DWC3_PHY_OMAP
 #undef CONFIG_USB_DWC3_OMAP
 #undef CONFIG_USB_DWC3
@@ -175,16 +157,7 @@
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_PAGE_SIZE	4096
-#define CONFIG_SYS_NAND_OOBSIZE		224
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(256*1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS	{ 2, 3, 4, 5, 6, 7, 8, 9, \
 				10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
 				20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
@@ -209,7 +182,6 @@
 			}
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	26
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00180000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT