X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam3517_evm.h;h=feb7b6eb97452ebbf1958070fd55d83bb7897a33;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=c9bc0930e05045dbdd81a1ff0cc5f6900474b302;hpb=16f416661ec5ffa46b3f879a0b83907bbec13714;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index c9bc093..feb7b6e 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -13,20 +13,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SYS_NO_FLASH
-
 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
 /*
@@ -42,9 +30,6 @@
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_MISC_INIT_R
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -60,9 +45,6 @@
 
 /* Hardware drivers */
 
-/* OMAP GPIO configuration */
-#define CONFIG_OMAP_GPIO
-
 /* NS16550 Configuration */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -76,16 +58,9 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
 /*
  * USB configuration
  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
@@ -98,9 +73,6 @@
 
 #ifdef CONFIG_USB_MUSB_HOST
 
-#define CONFIG_USB_STORAGE
-#define CONGIG_CMD_STORAGE
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
@@ -117,7 +89,6 @@
 
 /* commands to include */
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_PART
 #define CONFIG_CMD_MTDPARTS
 
 /* I2C */
@@ -141,7 +112,6 @@
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_BCH
-#define CONFIG_CMD_UBI			/* UBI-formated MTD partition support */
 #define CONFIG_CMD_UBIFS		/* Read-only UBI volume operations */
 #define CONFIG_RBTREE			/* required by CONFIG_CMD_UBI */
 #define CONFIG_LZO			/* required by CONFIG_CMD_UBIFS */
@@ -266,9 +236,7 @@
 /* Miscellaneous configurable options */
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_PARTITION_UUIDS
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS		64
@@ -341,24 +309,12 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_MTD_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 #endif /* __CONFIG_H */