X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam3517_evm.h;h=bf01a777cce003d28bd7179ecdf1df0af92a283e;hb=6115f1c4fe81015369e110ea9830a6e36710677c;hp=89c82cee07eec4b83cc7d25203d4dfbe046ad117;hpb=7e5ee346fc4c26c5f96ae13d599cf31d05fa6772;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 89c82ce..bf01a77 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,41 +14,11 @@
 
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_REVISION_TAG
-
-/* Hardware drivers */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * USB configuration
- * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
- * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_USB_EHCI_OMAP
-#else
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
-#endif
-
-/* I2C */
-
 /* Ethernet */
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		10
 
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
 					 11, 12, 13, 14, 16, 17, 18, 19, 20, \
 					 21, 22, 23, 24, 25, 26, 27, 28, 30, \
@@ -58,11 +28,9 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
@@ -153,9 +121,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
 
 /* Physical Memory Map */
 #define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
@@ -179,11 +144,6 @@
 
 /* Defines for SPL */
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
 #endif /* __CONFIG_H */