X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam3517_evm.h;h=9475e9975d5afd0c0f7269f7032a95a069df7146;hb=4862830b696a6d0750e19d32a82553cdb41a85f8;hp=4d94078d1ce6e87b497e8d60abfa11c1e6343dc7;hpb=48f58a59737739b0f96ceba9f7873178c6d917bf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 4d94078..9475e99 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * am3517_evm.h - Default configuration for AM3517 EVM board.
  *
@@ -6,30 +7,14 @@
  * Based on omap3_evm_config.h
  *
  * Copyright (C) 2010 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-
-#define CONFIG_SYS_TEXT_BASE		0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
-
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SDRC	/* Disable SDRC since we have EMIF4 */
 
-#define CONFIG_MISC_INIT_R
+#undef CONFIG_DM_I2C_COMPAT
 #define CONFIG_REVISION_TAG
 
 /* Hardware drivers */
@@ -58,19 +43,14 @@
 /* I2C */
 
 /* Ethernet */
-#define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT		10
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
@@ -91,8 +71,7 @@
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
@@ -110,7 +89,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
-	"console=ttyO2,115200n8\0" \
+	"console=ttyS2,115200n8\0" \
 	"fdtfile=am3517-evm.dtb\0" \
 	"fdtaddr=0x82C00000\0" \
 	"vram=16M\0" \
@@ -171,9 +150,6 @@
 	"else run nandboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS		64
@@ -191,8 +167,6 @@
 
 /* Physical Memory Map */
 #define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
 
 /* FLASH and environment organization */
 
@@ -215,13 +189,6 @@
 #define CONFIG_ENV_ADDR			0x260000
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE		0x40200000
-
-#undef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR	0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"