X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam335x_guardian.h;h=68b4e4f59033a2bfa809211e52aefe82550e2dbe;hb=6115f1c4fe81015369e110ea9830a6e36710677c;hp=b45b8d2eec7569ce87b96bf82d1d9b130d69546f;hpb=fae79480111be47944cf66a9c052ff3934a09ce5;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index b45b8d2..68b4e4f 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -22,38 +22,75 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - #ifndef CONFIG_SPL_BUILD #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x80000000\0" \ "pxefile_addr_r=0x80100000\0" \ + "tftp_load_addr=0x82000000\0" \ "kernel_addr_r=0x82000000\0" \ "fdt_addr_r=0x88000000\0" \ "ramdisk_addr_r=0x88080000\0" \ #define BOOT_TARGET_DEVICES(func) \ - func(UBIFS, ubifs, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) + func(UBIFS, ubifs, 0) #define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" #include +#define GUARDIAN_DEFAULT_PROD_ENV \ + "factory_assembly_status=0\0" \ + "main_pcba_part_number=0\0" \ + "main_pcba_supplier=0\0" \ + "main_pcba_timestamp=0\0" \ + "main_pcba_hardware_version=0\0" \ + "main_pcba_id=0\0" \ + "main_pcba_aux_1=0\0" \ + "main_pcba_aux_2=0\0" \ + "main_pcba_aux_3=0\0" \ + "main_pcba_aux_4=0\0" \ + #define CONFIG_EXTRA_ENV_SETTINGS \ AM335XX_BOARD_FDTFILE \ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV \ - "bootlimit=3\0" \ + GUARDIAN_DEFAULT_PROD_ENV \ + "autoload=no\0" \ + "backlight_brightness=50\0" \ "bootubivol=rootfs\0" \ + "distro_bootcmd=" \ + "setenv rootflags \"bulk_read,chk_data_crc\"; " \ + "setenv ethact usb_ether; " \ + "if test \"${swi_status}\" -eq 1; then " \ + "if dhcp; then " \ + "sleep 1; " \ + "if tftp \"${tftp_load_addr}\" \"bootscript.scr\"; then " \ + "source \"${tftp_load_addr}\"; " \ + "fi; " \ + "fi; " \ + "setenv extrabootargs $extrabootargs \"swi_attached\"; " \ + "fi;" \ + "run bootcmd_ubifs0;\0" \ "altbootcmd=" \ - "setenv boot_config \"extlinux-rollback.conf\"; " \ - "run distro_bootcmd\0" + "setenv boot_syslinux_conf \"extlinux/extlinux-rollback.conf\"; " \ + "run distro_bootcmd; " \ + "setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \ + "run bootcmd_ubifs0;\0" #endif /* ! CONFIG_SPL_BUILD */ +#define CONFIG_BMP_16BPP +#define SPLASH_SCREEN_NAND_PART "nand0,10" +#define SPLASH_SCREEN_BMP_FILE_SIZE 0x26000 +#define SPLASH_SCREEN_BMP_LOAD_ADDR 0x82000000 +#define SPLASH_SCREEN_TEXT "U-Boot" + +/* BGR 16Bit Color Definitions */ +#define CONSOLE_COLOR_BLACK 0x0000 +#define CONSOLE_COLOR_WHITE 0xFFFF +#define CONSOLE_COLOR_RED 0x001F + /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ @@ -68,15 +105,7 @@ /* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_LE -#ifdef CONFIG_NAND - -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 256 -#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) - +#ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ @@ -101,12 +130,13 @@ } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW #define MTDIDS_DEFAULT "nand0=nand.0" -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#endif /* CONFIG_MTD_RAW_NAND */ -#endif /* CONFIG_NAND */ +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST #endif /* ! __CONFIG_AM335X_GUARDIAN_H */