X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam335x_evm.h;h=a87059c5434b0f4c4409a4b31b08580a6ca7a84d;hb=1d2f74690cace803844bce198a6d5fa1b6cd11f9;hp=df1a6fc52885fcbb5368f4e38a204119aa9c627e;hpb=6defdc0b5552ab1af4a66a8abac8196cbb6b9e15;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index df1a6fc..a87059c 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -19,16 +19,11 @@
 #include <configs/ti_am335x_common.h>
 
 #ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_FIT
 # define CONFIG_FIT
+#endif
 # define CONFIG_TIMESTAMP
 # define CONFIG_LZO
-# ifdef CONFIG_ENABLE_VBOOT
-#  define CONFIG_OF_CONTROL
-#  define CONFIG_OF_SEPARATE
-#  define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack
-#  define CONFIG_FIT_SIGNATURE
-#  define CONFIG_RSA
-# endif
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN		(16 << 20)
@@ -50,8 +45,6 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
 
 #ifdef CONFIG_NAND
 #define NANDARGS \
@@ -115,6 +108,9 @@
 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
 		"ip=dhcp\0" \
 	"bootenv=uEnv.txt\0" \
+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
 	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
 		"env import -t -r $loadaddr $filesize\0" \
@@ -142,17 +138,21 @@
 	"mmcboot=mmc dev ${mmcdev}; " \
 		"if mmc rescan; then " \
 			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadbootenv; then " \
-				"echo Loaded environment from ${bootenv};" \
-				"run importbootenv;" \
-			"fi;" \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-			"if run loadimage; then " \
-				"run mmcloados;" \
-			"fi;" \
+			"if run loadbootscript; then " \
+				"run bootscript;" \
+			"else " \
+				"if run loadbootenv; then " \
+					"echo Loaded environment from ${bootenv};" \
+					"run importbootenv;" \
+				"fi;" \
+				"if test -n $uenvcmd; then " \
+					"echo Running uenvcmd ...;" \
+					"run uenvcmd;" \
+				"fi;" \
+				"if run loadimage; then " \
+					"run mmcloados;" \
+				"fi;" \
+			"fi ;" \
 		"fi;\0" \
 	"spiboot=echo Booting from spi ...; " \
 		"run spiargs; " \
@@ -219,6 +219,7 @@
 /* Bootcount using the RTC block */
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_AM33XX
+#define CONFIG_SYS_BOOTCOUNT_BE
 
 /* USB gadget RNDIS */
 #define CONFIG_SPL_MUSB_NEW_SUPPORT
@@ -236,6 +237,7 @@
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
@@ -309,6 +311,18 @@
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
+#ifndef CONFIG_SPL_USBETH_SUPPORT
+/* Fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE	0x07000000
+
+/* To support eMMC booting */
+#define CONFIG_STORAGE_EMMC
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
+#endif
+
 #ifdef CONFIG_MUSB_HOST
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
@@ -320,12 +334,18 @@
 #define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
 
 /* USB TI's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_VENDOR_NUM 0x0451
+#define CONFIG_G_DNL_PRODUCT_NUM 0xD022
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #endif /* CONFIG_MUSB_GADGET */
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
+/* Remove other SPL modes. */
+#undef CONFIG_SPL_YMODEM_SUPPORT
+#undef CONFIG_SPL_NAND_SUPPORT
+#undef CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_ENV_IS_NOWHERE
+#undef CONFIG_ENV_IS_IN_NAND
 /* disable host part of MUSB in SPL */
 #undef CONFIG_MUSB_HOST
 /* disable EFI partitions and partition UUID support */
@@ -347,10 +367,10 @@
 	"boot part 0 1;" \
 	"rootfs part 0 2;" \
 	"MLO fat 0 1;" \
-	"MLO.raw mmc 0x100 0x100;" \
-	"u-boot.img.raw mmc 0x300 0x400;" \
-	"spl-os-args.raw mmc 0x80 0x80;" \
-	"spl-os-image.raw mmc 0x900 0x2000;" \
+	"MLO.raw raw 0x100 0x100;" \
+	"u-boot.img.raw raw 0x300 0x400;" \
+	"spl-os-args.raw raw 0x80 0x80;" \
+	"spl-os-image.raw raw 0x900 0x2000;" \
 	"spl-os-args fat 0 1;" \
 	"spl-os-image fat 0 1;" \
 	"u-boot.img fat 0 1;" \
@@ -377,7 +397,7 @@
 	"fdt ram 0x80F80000 0x80000;" \
 	"ramdisk ram 0x81000000 0x4000000\0"
 #define DFUARGS \
-	"dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
+	"dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
 	DFU_ALT_INFO_MMC \
 	DFU_ALT_INFO_RAM \
 	DFU_ALT_INFO_NAND
@@ -398,8 +418,6 @@
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS		0
-#define CONFIG_SPL_SPI_CS		0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH