X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam335x_evm.h;h=754bcc3304b99037e3c033846afe5c36f757ce55;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=0f340806efc93b50ee2212b6084acb466d22e4b7;hpb=609983e981a0a7f053ee6f9f6cd2772226a33000;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 0f34080..754bcc3 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -19,10 +19,6 @@
 #include <configs/ti_am335x_common.h>
 #include <linux/sizes.h>
 
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
 #define CONFIG_SYS_BOOTM_LEN		SZ_16M
 
 /* Clock Defines */
@@ -31,14 +27,12 @@
 
 #ifdef CONFIG_MTD_RAW_NAND
 #define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"${optargs} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandrootfstype=ubifs rootwait\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
 		"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
@@ -138,6 +132,10 @@
 			"setenv fdtfile am335x-boneblue.dtb; fi; " \
 		"if test $board_name = BBEN; then " \
 			"setenv fdtfile am335x-sancloud-bbe.dtb; fi; " \
+		"if test $board_name = BBELITE; then " \
+			"setenv fdtfile am335x-sancloud-bbe-lite.dtb; fi; " \
+		"if test $board_name = BBE_EX_WIFI; then " \
+			"setenv fdtfile am335x-sancloud-bbe-extended-wifi.dtb; fi; " \
 		"if test $board_name = A33515BB; then " \
 			"setenv fdtfile am335x-evm.dtb; fi; " \
 		"if test $board_name = A335X_SK; then " \
@@ -170,7 +168,6 @@
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
 /* PMIC support */
-#define CONFIG_POWER_TPS65217
 #define CONFIG_POWER_TPS65910
 
 /* SPL */
@@ -194,44 +191,8 @@
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-/* NAND: SPL related configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
-#endif
 #endif /* !CONFIG_MTD_RAW_NAND */
 
-/*
- * For NOR boot, we must set this to the start of where NOR is mapped
- * in memory.
- */
-
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support and for gadget we add both RNDIS ethernet
- * and DFU.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER)
-/* Remove other SPL modes. */
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-#endif
-
 /* USB Device Firmware Update support */
 #ifndef CONFIG_SPL_BUILD
 #define DFUARGS \
@@ -273,16 +234,8 @@
  */
 #if defined(CONFIG_NOR)
 #define CONFIG_SYS_MAX_FLASH_SECT	128
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_SIZE		0x01000000
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #endif  /* NOR support */
 
-#ifdef CONFIG_DRIVER_TI_CPSW
-#define CONFIG_CLOCK_SYNTHESIZER
-#define CLK_SYNTHESIZER_I2C_ADDR 0x65
-#endif
-
 #endif	/* ! __CONFIG_AM335X_EVM_H */