X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fam335x_evm.h;h=4db04ff54e7e899467ea8608956430cb5b3ac9a5;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=15cda803cc2b6cd628c9837daeaf6313c85aba7d;hpb=fffb826ea05e9ae41e75fab756fa405824cad5e2;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 15cda80..4db04ff 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -19,19 +19,13 @@ #include #include -#ifndef CONFIG_SPL_BUILD -# define CONFIG_TIMESTAMP -#endif - #define CONFIG_SYS_BOOTM_LEN SZ_16M -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#ifdef CONFIG_NAND +#ifdef CONFIG_MTD_RAW_NAND #define NANDARGS \ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ @@ -50,15 +44,6 @@ #define NANDARGS "" #endif -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance"; "\ - "setenv bootpart " #instance":2 ; "\ - "run mmcboot\0" - -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ "bootcmd_" #devtypel "=" \ "run nandboot\0" @@ -66,6 +51,12 @@ #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ #devtypel #instance " " +#if CONFIG_IS_ENABLED(CMD_USB) +# define BOOT_TARGET_USB(func) func(USB, usb, 0) +#else +# define BOOT_TARGET_USB(func) +#endif + #if CONFIG_IS_ENABLED(CMD_PXE) # define BOOT_TARGET_PXE(func) func(PXE, pxe, na) #else @@ -80,10 +71,9 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ func(MMC, mmc, 1) \ - func(LEGACY_MMC, legacy_mmc, 1) \ func(NAND, nand, 0) \ + BOOT_TARGET_USB(func) \ BOOT_TARGET_PXE(func) \ BOOT_TARGET_DHCP(func) @@ -91,16 +81,11 @@ #ifndef CONFIG_SPL_BUILD #include -#include #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ "fdtfile=undefined\0" \ + "finduuid=part uuid mmc 0:2 uuid\0" \ "console=ttyO0,115200n8\0" \ "partitions=" \ "uuid_disk=${uuid_gpt_disk};" \ @@ -154,7 +139,10 @@ "if test $board_name = A335X_SK; then " \ "setenv fdtfile am335x-evmsk.dtb; fi; " \ "if test $board_name = A335_ICE; then " \ - "setenv fdtfile am335x-icev2.dtb; fi; " \ + "setenv fdtfile am335x-icev2.dtb; " \ + "if test $ice_mii = mii; then " \ + "setenv pxe_label_override Pruss; fi;" \ + "fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "init_console=" \ @@ -177,10 +165,6 @@ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - /* PMIC support */ #define CONFIG_POWER_TPS65217 #define CONFIG_POWER_TPS65910 @@ -193,16 +177,9 @@ /* USB gadget RNDIS */ #endif -#ifdef CONFIG_NAND +#ifdef CONFIG_MTD_RAW_NAND /* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) /* NAND: driver related configs */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ @@ -213,14 +190,11 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 /* NAND: SPL related configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ #endif -#endif /* !CONFIG_NAND */ +#endif /* !CONFIG_MTD_RAW_NAND */ /* * For NOR boot, we must set this to the start of where NOR is mapped @@ -228,18 +202,6 @@ */ /* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* * Disable MMC DM for SPL build and can be re-enabled after adding * DM support in SPL */ @@ -274,32 +236,12 @@ */ #if defined(CONFIG_SPI_BOOT) /* SPL related */ - -#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ -#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ #elif defined(CONFIG_EMMC_BOOT) -#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 0 -#define CONFIG_ENV_OFFSET 0x260000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_MAX_DEVICE 2 -#elif defined(CONFIG_NOR_BOOT) -#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ -#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ -#elif defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_OFFSET 0x001c0000 -#define CONFIG_ENV_OFFSET_REDUND 0x001e0000 -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #endif -/* SPI flash. */ - /* Network. */ -#define CONFIG_PHY_SMSC /* Enable Atheros phy driver */ -#define CONFIG_PHY_ATHEROS /* * NOR Size = 16 MiB @@ -315,7 +257,6 @@ */ #if defined(CONFIG_NOR) #define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE 0x01000000