X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fadp-ag101p.h;h=24904b0b7c3c39507ce146ab401edf2256f74174;hb=HEAD;hp=e37369b01e2222f04bd7a4d1f33a9b29076482ba;hpb=e91907a1464e5b79673c37f46dcb76d3c5b7c0c7;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h deleted file mode 100644 index e37369b..0000000 --- a/include/configs/adp-ag101p.h +++ /dev/null @@ -1,332 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Shawn Lin, Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * CPU and Board Configuration Options - */ -#define CONFIG_USE_INTERRUPT - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_ARCH_MAP_SYSMEM - -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_SERVERIP - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_MEM_REMAP -#endif - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_SEPARATE -#define CONFIG_OF_EMBED -#endif -#endif - -/* - * Timer - */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ - -/* - * Use Externel CLOCK or PCLK - */ -#undef CONFIG_FTRTC010_EXTCLK - -#ifndef CONFIG_FTRTC010_EXTCLK -#define CONFIG_FTRTC010_PCLK -#endif - -#ifdef CONFIG_FTRTC010_EXTCLK -#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ -#else -#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ -#endif - -#define TIMER_LOAD_VAL 0xffffffff - -/* - * Real Time Clock - */ -#define CONFIG_RTC_FTRTC010 - -/* - * Real Time Clock Divider - * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) - */ -#define OSC_5MHZ (5*1000000) -#define OSC_CLK (4*OSC_5MHZ) -#define RTC_DIV_COUNT (0.5) /* Why?? */ - -/* - * Serial console configuration - */ - -/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE -#ifndef CONFIG_DM_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#endif -#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool - */ -/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) - -/* - * AHB Controller configuration - */ -#define CONFIG_FTAHBC020S - -#ifdef CONFIG_FTAHBC020S -#include - -/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ -#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 - -/* - * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, - * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote - * in C language. - */ -#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ - (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ - FTAHBC020S_SLAVE_BSR_SIZE(0xb)) -#endif - -/* - * Watchdog - */ -#define CONFIG_FTWDT010_WATCHDOG - -/* - * PMU Power controller configuration - */ -#define CONFIG_PMU -#define CONFIG_FTPMU010_POWER - -#ifdef CONFIG_FTPMU010_POWER -#include -#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E -#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ - FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ - FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ - FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ - FTPMU010_SDRAMHTC_CKE_DCSR | \ - FTPMU010_SDRAMHTC_DQM_DCSR | \ - FTPMU010_SDRAMHTC_SDCLK_DCSR) -#endif - -/* - * SDRAM controller configuration - */ -#define CONFIG_FTSDMC021 - -#ifdef CONFIG_FTSDMC021 -#include - -#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ - FTSDMC021_TP1_TRP(1) | \ - FTSDMC021_TP1_TRCD(1) | \ - FTSDMC021_TP1_TRF(3) | \ - FTSDMC021_TP1_TWR(1) | \ - FTSDMC021_TP1_TCL(2)) - -#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ - FTSDMC021_TP2_INI_REFT(8) | \ - FTSDMC021_TP2_REF_INTV(0x180)) - -/* - * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, - * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in - * C language. - */ -#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ - FTSDMC021_CR1_DSZ(3) | \ - FTSDMC021_CR1_MBW(2) | \ - FTSDMC021_CR1_BNKSIZE(6)) - -#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ - FTSDMC021_CR2_IREF | \ - FTSDMC021_CR2_ISMR) - -#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE -#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ - CONFIG_SYS_FTSDMC021_BANK0_BASE) - -#define CONFIG_SYS_FTSDMC021_BANK1_BASE \ - (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) -#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ - CONFIG_SYS_FTSDMC021_BANK1_BASE) -#endif - -/* - * Physical Memory Map - */ -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ -#else -#ifdef CONFIG_MEM_REMAP -#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ -#else -#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ -#endif -#endif - -#define PHYS_SDRAM_1 \ - (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ -#else -#ifdef CONFIG_MEM_REMAP -#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ -#else -#define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#endif -#endif - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 - -#ifdef CONFIG_MEM_REMAP -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ - GENERATED_GBL_DATA_SIZE) -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) -#endif /* CONFIG_MEM_REMAP */ - -/* - * Load address and memory test area should agree with - * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x300000 - -/* memtest works on 63 MB in DRAM */ - -/* - * Static memory controller configuration - */ -#define CONFIG_FTSMC020 - -#ifdef CONFIG_FTSMC020 -#include - -#define CONFIG_SYS_FTSMC020_CONFIGS { \ - { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ - { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ -} - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ -#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_SIZE_32M | \ - FTSMC020_BANK_MBW_32) - -#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ - FTSMC020_TPR_AST(1) | \ - FTSMC020_TPR_CTW(1) | \ - FTSMC020_TPR_ATI(1) | \ - FTSMC020_TPR_AT2(1) | \ - FTSMC020_TPR_WTC(1) | \ - FTSMC020_TPR_AHT(1) | \ - FTSMC020_TPR_TRNA(1)) -#endif - -/* - * FLASH on ADP_AG101P is connected to BANK0 - * Just disalbe the other BANK to avoid detection error. - */ -#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ - FTSMC020_BANK_SIZE_32M | \ - FTSMC020_BANK_MBW_32) - -#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define FTSMC020_BANK1_CONFIG (0x00) -#define FTSMC020_BANK1_TIMING (0x00) -#endif /* CONFIG_FTSMC020 */ - -/* - * FLASH and environment organization - */ -/* use CFI framework */ - -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL - -/* support JEDEC */ - -/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define PHYS_FLASH_1 0x80000000 /* BANK 0 */ -#else -#ifdef CONFIG_MEM_REMAP -#define PHYS_FLASH_1 0x80000000 /* BANK 0 */ -#else -#define PHYS_FLASH_1 0x00000000 /* BANK 0 */ -#endif -#endif /* CONFIG_MEM_REMAP */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ - -/* max number of memory banks */ -/* - * There are 4 banks supported for this Controller, - * but we have only 1 bank connected to flash on board - */ -#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#endif -#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} - -/* max number of sectors on one chip */ -#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* environments */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - -/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) -/* Increase max gunzip size */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) - -#endif /* __CONFIG_H */