X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Factux1.h;h=9b8bd78943f407ea4e6326e42aba275a90601127;hb=335143c76612a0ae26eef8abeda77641d4f63b50;hp=33a74949a541ff5ea014a8a9fa141254b6941f78;hpb=2fd0aad443c966ce62008225e57b18e2dcf4e330;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 33a7494..9b8bd78 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -4,57 +4,35 @@ * * Configuration settings for the AcTux-1 board. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -/* 1: modified board with 32MB DRAM */ -#define CONFIG_ACTUX1_32MB 0 -/* 1: 2*2MB FLASH (standard) */ -#define CONFIG_ACTUX1_FLASH2X2 1 -/* 1: 1*8MB FLASH (upgraded boards) */ -#define CONFIG_ACTUX1_FLASH1X8 0 - #define CONFIG_IXP425 1 #define CONFIG_ACTUX1 1 +#define CONFIG_MACH_TYPE 1479 + #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 -#define CFG_IXP425_CONSOLE IXP425_UART2 +#define CONFIG_IXP_SERIAL +#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_SYS_LDSCRIPT "board/actux1/u-boot.lds" /*************************************************************** * U-boot generic defines start here. ***************************************************************/ -#undef CONFIG_USE_IRQ - /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -/* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_SIZE 128 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -63,8 +41,13 @@ #include #define CONFIG_CMD_ELF -#undef CONFIG_CMD_PCI -#undef CONFIG_PCI +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_PCI_PNP +#define CONFIG_IXP_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI_ENUM +#endif #define CONFIG_BOOTCOMMAND "run boot_flash" /* enable passing of ATAGs */ @@ -75,114 +58,102 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ -#define CFG_LONGHELP -#define CFG_PROMPT "=> " +#define CONFIG_SYS_LONGHELP /* Console I/O Buffer Size */ -#define CFG_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ -#define CFG_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ -#define CFG_BARGSIZE CFG_CBSIZE +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CFG_MEMTEST_START 0x00400000 -#define CFG_MEMTEST_END 0x00800000 +#define CONFIG_SYS_MEMTEST_START 0x00400000 +#define CONFIG_SYS_MEMTEST_END 0x00800000 -/* everything, incl board info, in Hz */ -#undef CFG_CLKS_IN_HZ -/* spec says 66.666 MHz, but it appears to be 33 */ -#define CFG_HZ 3333333 +/* timer clock - 2* OSC_IN system clock */ +#define CONFIG_IXP425_TIMER_CLK 66666666 /* default load address */ -#define CFG_LOAD_ADDR 0x00010000 +#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* Expansion bus settings */ -#define CFG_EXP_CS0 0xbd113842 +#define CONFIG_SYS_EXP_CS0 0xbd113842 /* SDRAM settings */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 -#define CFG_DRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#if CONFIG_ACTUX1_32MB -# define CFG_SDR_CONFIG 0x18 +#ifdef CONFIG_RAM_32MB +# define CONFIG_SYS_SDR_CONFIG 0x18 # define PHYS_SDRAM_1_SIZE 0x02000000 -# define CFG_SDRAM_REFRESH_CNT 0x81a -# define CFG_SDR_MODE_CONFIG 0x1 -# define CFG_DRAM_SIZE 0x02000000 +# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a +# define CONFIG_SYS_SDR_MODE_CONFIG 0x1 +# define CONFIG_SYS_DRAM_SIZE 0x02000000 #else /* 16MB SDRAM */ -# define CFG_SDR_CONFIG 0x3A +# define CONFIG_SYS_SDR_CONFIG 0x3A # define PHYS_SDRAM_1_SIZE 0x01000000 -# define CFG_SDRAM_REFRESH_CNT 0x81a -# define CFG_SDR_MODE_CONFIG 0x1 -# define CFG_DRAM_SIZE 0x01000000 +# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a +# define CONFIG_SYS_SDR_MODE_CONFIG 0x1 +# define CONFIG_SYS_DRAM_SIZE 0x01000000 #endif /* FLASH organization */ -#if CONFIG_ACTUX1_FLASH2X2 -# define CFG_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_TEXT_BASE 0x50000000 +#ifdef CONFIG_FLASH2X2 +# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of sectors on one chip */ -# define CFG_MAX_FLASH_SECT 40 +# define CONFIG_SYS_MAX_FLASH_SECT 40 # define PHYS_FLASH_1 0x50000000 # define PHYS_FLASH_2 0x50200000 -# define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } +# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } #endif -#if CONFIG_ACTUX1_FLASH1X8 -# define CFG_MAX_FLASH_BANKS 1 +#ifdef CONFIG_FLASH1X8 +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of sectors on one chip */ -# define CFG_MAX_FLASH_SECT 140 +# define CONFIG_SYS_MAX_FLASH_SECT 140 # define PHYS_FLASH_1 0x50000000 -# define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } +# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } #endif -#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_MONITOR_BASE PHYS_FLASH_1 -#define CFG_MONITOR_LEN (256 << 10) +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_BOARD_SIZE_LIMIT 262144 /* Use common CFI driver */ -#define CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER /* no byte writes on IXP4xx */ -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_EMPTY_INFO /* Ethernet */ /* include IXP4xx NPE support */ #define CONFIG_IXP4XX_NPE 1 -/* use separate flash sector with ucode images */ -#define CONFIG_IXP4XX_NPE_EXT_UCODE_BASE 0x50040000 -#define CONFIG_NET_MULTI 1 /* NPE0 PHY address */ #define CONFIG_PHY_ADDR 0 +/* NPE1 PHY address (HW Release E only) */ +#define CONFIG_PHY1_ADDR 1 /* MII PHY management */ #define CONFIG_MII 1 /* Number of ethernet rx buffers & descriptors */ -#define CFG_RX_ETH_BUFFER 16 +#define CONFIG_SYS_RX_ETH_BUFFER 16 #define CONFIG_RESET_PHY_R 1 +#define CONFIG_HAS_ETH1 1 + #define CONFIG_CMD_DHCP #define CONFIG_CMD_NET #define CONFIG_CMD_MII @@ -196,27 +167,30 @@ #define CONFIG_BOOTP_HOSTNAME /* Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SIZE 32 /* * environment organization: * one flash sector, embedded in uboot area (bottom bootblock flash) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x2000 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) -#define CFG_USE_PPCENV 1 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) +#define CONFIG_SYS_USE_PPCENV 1 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "npe_ucode=50040000\0" \ "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ "kerneladdr=50050000\0" \ + "kernelfile=actux1/uImage\0" \ + "rootfile=actux1/rootfs\0" \ "rootaddr=50170000\0" \ "loadaddr=10000\0" \ "updateboot_ser=mw.b 10000 ff 40000;" \ " loady ${loadaddr};" \ " run eraseboot writeboot\0" \ "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} u-boot.bin;" \ + " tftp ${loadaddr} actux1/u-boot.bin;" \ " run eraseboot writeboot\0" \ "eraseboot=protect off 50000000 50003fff;" \ " protect off 50006000 5003ffff;" \ @@ -224,8 +198,9 @@ " erase 50006000 5003ffff\0" \ "writeboot=cp.b 10000 50000000 4000;" \ " cp.b 16000 50006000 3a000\0" \ - "eraseenv=protect off 50004000 50005fff;" \ - " erase 50004000 50005fff\0" \ + "updateucode=loady;" \ + " era ${npe_ucode} +${filesize};" \ + " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ "updateroot=tftp ${loadaddr} ${rootfile};" \ " era ${rootaddr} +${filesize};" \ " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ @@ -236,7 +211,7 @@ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \ "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ "boot_flash=run flashargs addtty addeth;" \ " bootm ${kerneladdr}\0" \ @@ -244,4 +219,8 @@ " tftpboot ${loadaddr} ${kernelfile};" \ " bootm\0" +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */