X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fac14xx.h;h=2a46e9b86471c157bd35274d7f2c36d2b6366c2b;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=8a5d1e6fa4168f3a6c2ecee4bc2af113023540d9;hpb=ef0f2f57524ec85fb9058a23298f2c4995e0d950;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index 8a5d1e6..2a46e9b 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -13,8 +13,6 @@
 #define __CONFIG_H
 
 #define CONFIG_AC14XX 1
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * Memory map for the ifm AC14xx board:
@@ -33,11 +31,6 @@
 
 #define CONFIG_SYS_TEXT_BASE	0xFFF00000
 
-#if defined(CONFIG_VIDEO)
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#endif
-
 #define CONFIG_SYS_MPC512X_CLKIN	25000000	/* in Hz */
 #define SCFR1_IPS_DIV			2
 #define SCFR1_LPC_DIV			2
@@ -290,9 +283,9 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -319,8 +312,6 @@
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
 
-#define CONFIG_BAUDRATE			115200	/* ... at 115200 bps */
-
 #define CONSOLE_FIFO_TX_SIZE		FIFOC_PSC3_TX_SIZE
 #define CONSOLE_FIFO_TX_ADDR		FIFOC_PSC3_TX_ADDR
 #define CONSOLE_FIFO_RX_SIZE		FIFOC_PSC3_RX_SIZE
@@ -343,32 +334,14 @@
 			 CLOCK_SCCR2_DIU_EN |		\
 			 CLOCK_SCCR2_I2C_EN)
 
-
 #define CONFIG_CMDLINE_EDITING		1	/* command line history */
 
-/* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
 /*
- * EEPROM configuration for Atmel AT24C01:
- * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	30
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
-
-/*
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC		1
@@ -394,34 +367,20 @@
 #define CONFIG_LOADS_ECHO		1
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
 #undef CONFIG_CMD_FUSE
-#define CONFIG_CMD_I2C
 #undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_EXT2
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
-#endif /* defined(CONFIG_CMD_IDE) */
-
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"ac14xx> "	/* Monitor Command Prompt */
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
@@ -458,14 +417,6 @@
 
 #define CONFIG_HIGH_BATS		1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD			0x01
-#define BOOTFLAG_WARM			0x02
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
 #endif
@@ -479,7 +430,6 @@
 /* default load addr for tftp and bootm */
 #define CONFIG_LOADADDR		400000
 
-#define CONFIG_BOOTDELAY	2	/* -1 disables auto-boot */
 
 /* the builtin environment and standard greeting */
 #define CONFIG_PREBOOT	"echo;"	\
@@ -559,9 +509,6 @@
 
 #define CONFIG_ARP_TIMEOUT	200UL
 
-#define CONFIG_FIT		1
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES	1
 
 #define OF_CPU			"PowerPC,5121@0"