X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fa3m071.h;h=60158f96d4abbdcfce09d7da39c22804796fbbd4;hb=f40574e2d78c96a3818c4fa2379382d924866a6e;hp=8f17dd18c7ac38cf7edc59e320fa6af9bc95dcca;hpb=2fbb8462b0e18893b4b739705db047ffda82d4fc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 8f17dd1..60158f9 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -14,7 +14,6 @@
 
 #define CONFIG_MPC5200
 #define CONFIG_A3M071			/* A3M071 board */
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE	0x01000000	/* boot low for 32 MiB boards */
 
@@ -37,7 +36,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	    /* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE		\
 	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -54,7 +52,6 @@
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_NET_RETRY_COUNT 3
 #define CONFIG_NETCONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS	/* needed for UBI */
 #define CONFIG_FLASH_CFI_MTD
@@ -75,7 +72,6 @@
 #define CONFIG_LZO			/* needed for UBI */
 #define CONFIG_RBTREE			/* needed for UBI */
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
 /*
@@ -249,8 +245,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
-
 /*
  * Various low-level settings
  */
@@ -332,8 +326,8 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define CONFIG_SYS_OS_BASE	0xfc200000
 #define CONFIG_SYS_FDT_BASE	0xfc1e0000
+#define CONFIG_SYS_FDT_SIZE	(16<<10)
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
@@ -396,18 +390,12 @@
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NOR_SUPPORT
 #define CONFIG_SPL_TEXT_BASE	0xfc000000
-#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* Place BSS for SPL near end of SDRAM */
 #define CONFIG_SPL_BSS_START_ADDR	((128 - 1) << 20)
 #define CONFIG_SPL_BSS_MAX_SIZE		(64 << 10)
 
-#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_ENV_SUPPORT
 /* Place patched DT blob (fdt) at this address */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x01800000